GB 29988-2013Food additive -- Potassium alginate (alginate, potassium) (English PDF)
Also coversGB29988-2013
This is a limited preview
Buy now to download the full PDF (7 pages)
Need quotation for your management?
Get a formal quotation for GB 29988-2013 in 30 minutes.
Issued by
National Health and Family Planning Commission of the People's Republic of China
Level / Type
National · Mandatory
Issue date
January 1, 1970
Implementation date
January 1, 1970
Scope
GB 29988-2013 (Food additive -- Potassium alginate (alginate, potassium)) is available as an English-translated PDF.
GB 29988-2013 — This standard applies to the kelp (Laminaria), kelp (Macrocystis), Ascophyllum nodosum (Ascophyllum) brown algae and other plants were extracted Processed food additive made from seaweed potassium (potassium alginate). Formula 2 (C6H7O6K) n
Found what you need?
Document preview — GB 29988-2013
National Standard of the People's Republic of China
- ICS
- 67.020
- Classification
- C 53
Issued by: National Health and Family Planning Commission of the People's Republic of China
Contents
- 1 Scope
- 3 Technical requirements
- 3.1 Sensory requirements
- 3.2 Physical and Chemical Indicators
1 Scope
This standard applies to the kelp (Laminaria), kelp (Macrocystis), Ascophyllum nodosum (Ascophyllum) brown algae and other plants were extracted Processed food additive made from seaweed potassium (potassium alginate).
Formula 2
(C6H7O6K) n
3 Technical requirements
3.1 Sensory requirements
Sensory requirements shall comply with the requirements of Table 1.
Table 1 Sensory requirements
Project requires test methods Color white to yellow white porcelain dish placed on a sample taken in natural light, observed Color and Status fibrous or granular powder
3.2 Physical and Chemical Indicators
Physical and chemical indicators should be consistent with the provisions of Table 2.
Table 2. Physical and chemical indicators
Item Index Test Method Viscosity (20 °C) / mPa · s compliance claimed in Appendix A A.3 Loss on drying, w /% <= 15.0 GB 5009.3 direct drying Potassium alginate content (K2O terms, on a dry basis), w /% 15.0 ~ 22.0 GB/T 17767.3 pH (10g/L solution) 6.0-8.0 Appendix A A.4 Water-insoluble, w /% <= 0.6 A.5 in Appendix A Ash (dry basis), w /% 24 ~ 32 A.6 in Appendix A Lead (Pb)/(mg/kg) <= 4 GB 5009.12 Total arsenic (As)/(mg/kg) <= 2 GB/T 5009.11 Loss on drying of dry sample items a sample taken after the determination; samples were prepared using a solution of nitric acid - perchloric acid consumption of cooking.
Appendix A
Testing method
A.1 General Provisions Unless otherwise specified in this standard, the use of analytical reagent purity should be more than the standard titration solution, standard solution for measuring impurities, Preparations and products, should be GB/T 601, GB/T 602, GB/T 603 requirements preparation, test water should be consistent with GB/T 6682-2008 in three Water provisions. Solution was used in the tests did not indicate what is formulated with solvent, it refers to an aqueous solution.
A.2 Identification Test A.2.1 Reagents and materials A.2.1.1 calcium chloride solution. 25 g/L.
A.2.1.2 sulfuric acid solution. 1 mol/L.
A.2.1.3 1,3- dihydroxy-Naphthyl alcohol solution (10 g/L). Weigh about 1 g 1,3- dihydroxynaphthalene was dissolved in 100 mL absolute ethanol, mixing (now Existing service).
A.2.1.4 hydrochloric acid.
A.2.1.5 isopropyl ether.
A.2.2 Preparation of sample solution Weigh approximately 1 g sample was dissolved in 100 mL of water use.
A.2.3 Identification A.2.3.1 soluble test Sample in water was slowly dissolved to form a glue-like liquid, not soluble in ethanol and 30% ethanol solution, not soluble in chloroform and ether, and pH
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 7 pages — is available in the English PDF.
How to Download GB 29988-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 11118-2026 — Hydraulic fluids (L-HL, L-HM, L-HV, L-HS and L-HG type)
GB 11557-2026 — Provisions for protecting drivers from injury by the steering mechanism of motor vehicles
GB 12021.4-2026 — Maximum allowable values of the energy consumption, water consumption and grades for electric washing machines and washer-dryers
Secure payment via Stripe
Payments accepted
GB 29988-2013
$85.00