Valid

GB 28663-2012Emission standard of air pollutants for ironmaking industry (English PDF)

炼铁工业大气污染物排放标准

Preview PDF

This is a limited preview

Buy now to download the full PDF

Need quotation for your management?

Get a formal quotation for GB 28663-2012 in 30 minutes.

Issued by

MOEP; AQSIQ

Level / Type

National · Mandatory

Issue date

September 3, 2012

Implementation date

October 1, 2012

Scope

GB 28663-2012 is the English-translated version of 炼铁工业大气污染物排放标准.

GB 28663-2012 is the Chinese standard "Emission standard of air pollutants for ironmaking industry".

Its scope clause reads: This Standard specifies the emission limits, monitoring and control requirements of air pollutants for ironmaking manufacturing enterprises or production facilities, and the implementation and supervision of the standard and other relevant specifications.

This Standard applies to the air pollutant emission management of existing ironmaking manufacturing enterprises or production facilities, and the environmental impact assessment, environmental protection facility design, environmental protection acceptance after completion and air pollutant emission management after launching into production of ironmaking industry's construction projects.

This Standard applies to the pollutant emission behavior permitted by law; the site selection of newly established pollution sources and the management of existing pollution sources within the special protection area shall be in accordance with the relevant specifications of laws, regulations and rules such as "Air Pollution Prevention Law of the People's Republic of China”, “Water Pollution Prevention Law of the People's Republic of China”, “Marine Environmental Protection Law of the People's Republic of China”, “Solid Waste Pollution Prevention Law of the People's Republic of China” and “Environmental Impact Assessment Law of the People's Republic of China”. Its clauses include terms and definitions.

Found what you need?

Document preview — GB 28663-2012

National Standard of the People's Republic of China

Issued by: MOEP; AQSIQ

Contents

  • Foreword5
  • 1 Scope7
  • 2 Normative references7
  • 3 Terms and definitions8
  • 4 Emission control requirements for air pollutants10
  • 5 Monitoring requirements for air pollutants12
  • 6 Implementation and supervision13

1 Scope

This Standard specifies the emission limits, monitoring and control requirements of air pollutants for ironmaking manufacturing enterprises or production facilities, and the implementation and supervision of the standard and other relevant specifications.

This Standard applies to the air pollutant emission management of existing ironmaking manufacturing enterprises or production facilities, and the environmental impact assessment, environmental protection facility design, environmental protection acceptance after completion and air pollutant emission management after launching into production of ironmaking industry's construction projects.

This Standard applies to the pollutant emission behavior permitted by law; the site selection of newly established pollution sources and the management of existing pollution sources within the special protection area shall be in accordance with the relevant specifications of laws, regulations and rules such as "Air Pollution Prevention

Law of the People's Republic of China”, “Water Pollution Prevention Law of the

People's Republic of China”, “Marine Environmental Protection Law of the People's

Republic of China”, “Solid Waste Pollution Prevention Law of the People's Republic of

China” and “Environmental Impact Assessment Law of the People's Republic of China”.

2 Normative references

This Standard references the following documents or their terms.

GB/T 15432-1995 Ambient air - Determination of total suspended particulates -

Gravimetric method

GB/T 16157-1996 The determination of particulates and sampling methods of gaseous pollutants emitted from exhaust gas of stationary source

HJ/T 42-1999 Stationary source emission - Determination of nitrogen oxide -

Ultraviolet spectrophotometric method

HJ/T 43-1999 Stationary source emission - Determination of nitrogen oxid - N(1- naphtye) - Ethylenediamine dihydrochloride spectrophotometric method

HJ/T 56-2000 Determination of sulphur dioxide from exhausted gas of stationary source - Iodine titration method

HJ/T 57-2000 Determination of sulphur dioxide from exhausted gas of stationary source - Fixed-potential electrolysis method

HJ/T 397-2007 Technical specifications for emission monitoring of stationary source

HJ/T 629-2011 Stationary source emission - Determination of sulphur dioxide -

Non-dispersive infrared absorption method

"Pollution Automatic Monitoring and Management Measures" (State

Environmental Protection Administration Order No. 28)

"Environmental Monitoring Management Measures" (State Environmental

Protection Administration Order No. 39)

3 Terms and definitions

The following terms and definitions apply to this Standard.

3.1 Blast furnace ironmaking

The production process of using blast furnace to smelt pig iron. Blast furnace is the main part of the production process; the iron ores, fuels and fluxes that are loaded from the upper part move downward; air fuels are blew into the lower part to burn; a large amount of high-temperature reducing gas is generated and moved upward; after a series of physical-chemical processes such as heating, reduction, melting, slagging, carburizing and desulfurization, the furnace charge turns into liquid slag and pig iron.

3.2 Existing facility

Before the implementation of this Standard, the ironmaking manufacturing enterprises or production facilities that have been built and launched into production or the environmental impact assessment documents have been approved.

3.3 New facility

The new, rebuilt and expanded ironmaking industry production facility's construction projects of which the environmental impact assessment documents have been approved, from the date of implementation of this Standard.

3.4 Standard condition

The condition when the temperature is 273.15K and the pressure is 101325Pa. The air pollutant emission concentration specified in this Standard is on the basis of dry gases under standard conditions.

3.5 Blast furnace cast house

The place where blast furnace casts iron, including tap hole, main tap drain, sand hole, iron runner, residue runner, tank level, swinging spout and other...

GB 36886 | GB 20891 | GB 4287 | GB 28664 | […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — all pages — is available in the English PDF.

Referenced standards

Cited by

How to Download GB 28663-2012

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

Valid

GB/T 15432-1995 — Ambient air--Determination of total suspended particulates--Gravimetric method

National·Recommended
Instant delivery (0–9 sec)
$35.008 pages
Valid

GB/T 16157-1996 — Determination of particulates and sampling methods of gaseous pollutants emitted from exhaust gas of stationary source

National·Recommended
Instant delivery (0–9 sec)
$160.0059 pages
Valid

GB 11118-2026 — Hydraulic fluids (L-HL, L-HM, L-HV, L-HS and L-HG type)

National·Mandatory
Instant delivery (0–9 sec)
$345.0023 pages
English PDF
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB 28663-2012

$55.00