GB 27900-2011Firemen's special call unit (English PDF)
消防员呼救器
This is a limited preview
Buy now to download the full PDF (14 pages)
Need quotation for your management?
Get a formal quotation for GB 27900-2011 in 30 minutes.
Issued by
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China; Standardization Administration of China
Level / Type
National · Mandatory
Issue date
December 30, 2011
Implementation date
June 1, 2012
Scope
GB 27900-2011 is the English-translated version of 消防员呼救器.
GB 27900-2011 specifies the terms and definitions, model designation, technical requirements, test methods, inspection rules, and marking, packaging, transport and storage of firemen's special call units - the personal distress alarms carried by firefighters during firefighting and rescue operations.
The call unit must work from -25 °C to 70 °C on a rechargeable battery, emit a pre-alert after a permissible static time of 30 s ± 2 s and a full alert with a position-indicating strobe light after a further 15 s ± 2 s, cancellable only by hand, and offer a manual alert, a low-voltage warning at 80% of rated voltage and an off-manual-automatic selector switch.
Performance limits include sound levels of at least 80 dB (pre-alert), 100 dB (alert) and 65 dB (low-voltage warning), 24 h switched-on and 240 min continuous alert time, a mass of no more than 300 g, explosion protection to GB 3836.1, insulation resistance, water tightness at 1.5 m for 2 h, climatic and mechanical environmental tests, luminance of at least 300 cd/m2, and radio requirements for communication-type units (frequency error ±25 kHz, stability ±2.5 × 10^-6, sensitivity 0.5 µV, range 800 m).
Clause 5, Clause 7 and 8.1.1 are mandatory, the rest recommended; this is the first edition. It was issued on 30 December 2011 and has been in force since 1 June 2012.
Classification: ICS 13.220.10, CCS C85. The document runs to 14 pages, delivered complete in English translation.
Found what you need?
Document preview — GB 27900-2011
National Standard of the People's Republic of China
- ICS
- 13.220.10
- Classification
- C85
Issued by: General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China; Standardization Administration of China
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Model
- 5 Technical requirements
- 6 Test methods
- 7 Inspection rules
- 8 Marking, packaging, transport and storage
3 Terms and definitions
4 Model
5 Technical requirements
6 Test methods
7 Inspection rules
8 Marking, packaging, transport and storage
Foreword
Clause 5, Clause 7 and 8.1.1 of this standard are mandatory; the remainder are recommended.
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard was proposed by the Ministry of Public Security of the People's Republic of China.
This standard is under the jurisdiction of the Subcommittee on Firefighters' Protective Equipment of the National Technical Committee for Fire Protection Standardization (SAC/TC 113/SC 12).
Drafting organisation: Shanghai Fire Research Institute of the Ministry of Public Security.
Main drafters: Shen Jianmin, Zhou Tian, Ma Jiaojiao, Zhang Yan, Li Ruikun, Li Yuzhang.
This standard is issued for the first time.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 14 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB/T 2423.1Environmental testing for electric and electronic products - Part 2: Test methods - Tests A: Cold
- GB/T 2423.2Environmental testing for electric and electronic products - Part 2: Test methods - Tests B: Dry heat
- GB/T 2423.4Environmental testing for electric and electronic products - Part 2: Test method - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
- GB/T 2423.5Environmental testing - Part 2: Test methods - Test Ea and guidance: Shock
- GB/T 2423.8Environmental testing for electric and electronic products - Part 2: Test methods - Test Ed: Free fall
Similar standards
Editions of GB 27900
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB 27900-2011 | Firemen's special call unit | current edition | Current |
This page sells the current edition, GB 27900-2011. Earlier editions are listed for reference only.
How to Download GB 27900-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 3836.1-1983 — Electrical apparatus for explosive atmosphere--General requirements
GB 3836.1-2000 — Electrical apparatus for explosive gas atmospheres-Part 1: General requirements
GB 3836.1-2010 — [Replaced by GB/T 3836.1-2021] Explosive atmospheres - Part 1: Equipment - General requirements
GB 27900-2011
$225.00