Valid

GB 24938-2010Low-speed goods vehicle -- Self-unloading system -- Safety requirements (English PDF)

低速货车自卸系统 安全技术要求

Preview PDF

This is a limited preview

Buy now to download the full PDF (5 pages)

Need quotation for your management?

Get a formal quotation for GB 24938-2010 in 30 minutes.

Issued by

Standardization Administration of China

Level / Type

National · Mandatory

Issue date

August 9, 2010

Implementation date

January 1, 2011

Scope

GB 24938-2010 is the English-translated version of 低速货车自卸系统 安全技术要求.

GB 24938-2010 — This standard specifies the safety requirements and measures for low-speed vehicle hydraulic dump system determines safety requirements and measures, the use of information. This standard applies to low-speed trucks dump hydraulic system.

Found what you need?

Document preview — GB 24938-2010

National Standard of the People's Republic of China

ICS
65.060
Classification
T 54

Issued by: Standardization Administration of China

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Security requirements and measures
  • 3.1 General requirements
  • 3.2 Security guards
  • 3.3 Lifting and fall
  • 3.4 Hydraulic System
  • 3.5 Operating mechanism
  • 4.1 General Requirements
  • 4.2 Security guards
  • 4.3 Lifting and fall
  • 4.4 Hydraulic System
  • 4.5 Operating mechanism
  • 5 Use Information

Foreword

All the technical contents of this standard is mandatory.

The standard proposed by China Machinery Industry Federation.

The low standard by the National Automotive Standardization Technical Committee (SAC/TC234) centralized.

1 Scope

This standard specifies the safety requirements and measures for low-speed vehicle hydraulic dump system determines safety requirements and measures, the use of information.

This standard applies to low-speed trucks dump hydraulic system.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.

GB 24943 wheel vehicles and low-speed vehicles with safety signs Symbol GB/T 19122 farm vehicles, controls, indicators and telltales

3 Security requirements and measures

3.1 General requirements

3.1.1 Design of low-speed trucks dump system, manufacturing should ensure safe operation. In accordance with the manufacturer product instructions normal operation and maintenance There should be no unreasonable risk when maintenance.

3.1.2 low-speed trucks dump system used by the component shall comply with the national standards, industry standards, granted in accordance with prescribed procedures Quasi products manufacturing drawings and technical documents.

3.2 Security guards

3.2.1 dump system should be set after lifting the state of repair of mechanical locking devices, rollover Tipper dump transport system should be set up state Locking means. Locking device should be able to secure locking.

3.2.2 The system should ensure that there is dump wagons automatic lifting phenomenon in the process of moving.

3.3 Lifting and fall

3.3.1 The system should enable the dump wagons steady rise, fall or stop at any position, there should be ran, collision and wiring.

3.3.2 at 10% overload condition, give rise to 20 °, the residence 5min, carriages from the lower amount of not more than 1 °.

3.3.3 Dump system should enable accurate return after lifting the car.

3.4 Hydraulic System

3.4.1 Hydraulic dump system pressure safety devices (pressure limiting device) should be installed.

3.4.2 hydraulic dump system 1.5 times (the rated working pressure <=15MPa) or 1.25 times (the rated working pressure > 15MPa) rated operating Under pressure to make, is not allowed within 3min oil leakage, cracking, swelling and partial disengagement joints and so on.

3.4.3 Dump hydraulic system piping should be reasonable layout, stable fixation, away from hot surfaces, moving parts, exhaust and electrical equipment, there should be no infiltration Drain, loose, loss and interference phenomena.

3.4.4 When necessary, should be high-pressure tubing hydraulic dump system piping protection, to ensure that when the pipeline rupture, without splashing into the body.

3.5 Operating mechanism

Operating mechanism and other components should not have interference, measures should be taken to prevent accidental start-control mechanism. The control mechanism should be flexible, accurate Accurate, reliable, and should not be displaced due to vibration.

Determining safety requirements and measures 4

4.1 General Requirements

Dump system carrying dangerous does not occur during the test according to the manufacturer product instructions normal operation and maintenance, it is determined the project qualified.

4.2 Security guards

4.2.1 Visually inspect the locking device is qualified.

4.2.2 dump truck driving at full load, in the three and three of the following roads at least 1h, observe whether the trunk automatic lift L phenomenon.

4.3 Lifting and fall

4.3.1 to 3.3.1, dump truck without a load, stopping on a flat, hard surface of the ground, steering system dump, visually check for eligibility.

4.3.2 dump truck at 10% overload state, stopping on a flat, hard ground surface, uniform load, mounted on the side of the wagon tailgate dumping direction Inclinometer, then wagons give rise to 20 °, the residence 5min, read and record the starting and ending point of view angle instrument, calculate the difference. Press dumping direction, each repeated three times, and three times the difference between the average of the trunk from the lower amount.

4.3.3 Dump visual system enables car lifting the return after the accuracy of eligibility.

4.4 Hydraulic System

4.4.1 to 3.4.1, a visual inspection pressure safety devices (pressure limiting device) is set.

4.4.2 hydraulic dump system pressure rises to 1.5 times (the rated working pressure <=15MPa) or 1.25 times (the rated working pressure After > 15MPa) rated working pressure, keeping 3min, to observe whether there is oil leakage, cracking, swelling and partial disengagement joints and so on.

4.4.3 to 3.4.3, a visual inspection is qualified.

4.4.4 to 3.4.4, a visual inspection is qualified.

4.5 Operating mechanism

Dump system operated steering mechanism, visually check for eligibility.

5 Use Information

5.1 Dump system controls, graphic indicators and telltales signs shall comply with GB/T 19122 of.

5.2 Dump Truck type for both sides of the box should have safety signs dump legacy systems risk, safety signs, composition, color and size should be consistent GB 24943 requirements.

Dump near 5.3 system is easy to see the position of the operating mechanism should be set up operation identifying, labeling should provide clear information on the operating mechanism, and with the background Clear color.

5.4 tipper manual, Tipper system should be given the main technical and performance parameters.

5.5 Tipper operating instructions, shall be given to use dump system controls and locking devices, and highlighted.

--- Dump process, the cargo box dump direction is prohibited to stand on; after the lift cylinder from the top, we must firmly support the locking device before below operation;

--- Strictly prohibited in the slope of more than 5% of the cross-slope lift cargo containers, to prevent accidents caused by rollover or skid;

--- When the lifting operation, the engine speed should be kept uniform and stable, can not Meng throttle;

--- In the transport position, each locking device should be reliable locking.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 5 pages — is available in the English PDF.

Referenced standards

How to Download GB 24938-2010

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
5 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB 24938-2010

$75.00