GB 21902-2008Emission standard for pollutants form synthetic leather and artificial leather industry (English PDF)

Foreword

This Standard is regulated to protect environment, prevent pollution and improve industrial

production technology and pollution treatment technology of synthetic leather and artificial

leather in accordance with Environmental Protection Law of the People's Republic of

China", "Water Pollution Control Act of the People's Republic of China", "Air Pollution

Control Act of the People's Republic of China", "Marine Environment Protection of the

People's Republic of China", and "Decision on implementing the scientific development of

the State Council to Enhance Environmental Protection".

The standard specifies the emission limit and monitoring requirements of water and air

pollution for synthetic leather and artificial leather. Special emission limit of water

pollutants is specified in this Standard to enhance the harmonious development of region

economy and environment, drive the adjustment of economic structure and change in the

pattern of economic growth and guide the development direction of industrial production

technology and pollution treatment technology.

Pollution emission concentration of this Standard acts as quality concentration.

Stink pollution emission and environmental noise of synthetic leather and artificial leather

enterprises apply the related emission standard of state pollution and their identification,

treatment and disposition of solid waste apply the control standard of state solid pollution.

This Standard is issued for the first time.

Since the implementation day of this Standard, the emission control of water and air

pollution of synthetic leather and artificial leather enterprises would be formulated and

carried out according to this Standard and the related regulations in "Integrated

Waste-water Emission Standard" (GB 8978-1996) and "Integrated Air Pollution Emission

Standard" (GB 16297-1996).

This Standard is formulated by Science Standard Department of Environment Protection

Ministry.

The main drafting departments of this Standard are as follows. Wenzhou City Environment

Monitoring Center Station, Wenzhou City Environment Protection and Design Academy of

Science, Wenzhou Artificial Leather Co., Ltd and Environment Standard Research

Academy of Ministry of Environmental Protection.

And it is approved by Ministry of Environment Protection on May 29th 2008.

This Standard would be carried out since August 1st 2008.

Pollution Emission Standard of Synthetic Leather and

Artificial Leather Industry

1 Scope

This Standard specifies water and air pollution emission limit of characteristic production

technology and equipment for synthetic leather and artificial leather industry enterprises.

This Standard is applicable to environmental impact assessment, environment protection

facilities design, environment protection acceptance, and water and air pollution emission

management of construction project for available synthetic leather and artificial leather

industry.

This Standard is applicable to pollution emission behavior allowed by laws. The site

selection of pollution sources newly established and the management of existed pollution

sources in special protection area shall be carried out in accordance with related

provisions of the laws, regulations and rules such as "Atmospheric Pollution Prevention

Law of the People's Republic of China", "Water Pollution Control Act of the People's

Republic of China", "Marine Environment Protection of the People's Republic of China",

"Solid Waste Pollution Control Act of the People's Republic of China", "Radioactive

Pollution Control Act of the People's Republic of China", and "Laws on Environment

Impact Assessment of the People's Republic of China".

Water pollutants emission control requirements of this Standard is applicable to

enterprises for emission behavior of environmental water.

When the enterprises discharge waste-water to city drainage system equipped with

sewage treatment plant, the pollution emission control requirements shall be decided by

enterprises and city sewage treatment plant according to i...

......