GB 20686-2006Glyphosate water soluble powders (granules) (English PDF)
草甘膦可溶粉(粒)剂
This is a limited preview
Buy now to download the full PDF (19 pages)
Need quotation for your management?
Get a formal quotation for GB 20686-2006 in 30 minutes.
Issued by
General Administration of Quality Supervision, Inspection and Quarantine of the People 's Republic of China
Level / Type
National · Mandatory
Issue date
May 31, 2017
Implementation date
December 1, 2017
Scope
GB 20686-2006 is the English-translated version of 草甘膦可溶粉(粒)剂.
GB 20686-2006 — This standard specifies the requirements of the glyphosate soluble powder (granules), the acceptance of the test method, the warranty period and the marking, labeling, packaging and storage.
This standard applies to glyphosate from the original glyphosate or glyphosate soluble salts, carriers and suitable additives from the processing of glyphosate sodium salt, potassium, Ammonium salts, dimethylamine salts, isopropyl ammonium salt soluble powders and soluble granules.
Note. For other names, structural formulas and basic physicochemical parameters of glyphosate and nitroso glyphosate, see Appendix A.
Found what you need?
Document preview — GB 20686-2006
National Standard of the People's Republic of China
- ICS
- 65.100.20
- Classification
- G 25
- Replacing
- GB/T 20686-2006
Issued by: General Administration of Quality Supervision, Inspection and Quarantine of the People 's Republic of China
Contents
- Preface
- 1 Scope
- 2 Normative reference document
- 3 Requirements
- 3.1 Composition and appearance
- 3.2 Technical Specifications
- 4 Test Method
- 4.1 General provisions
- 4.2 Sampling
- 4.3 Identification test
- 4.4 Determination of glyphosate mass fraction
- 4.5 Determination of sodium ion, potassium ion, ammonium ion, dimethylamine ion, isopropylamine ion mass fraction
Foreword
This standard is drafted in accordance with the rules given in GB/T 1.1-2009.
This standard replaces GB/T 20686-2006 "glyphosate soluble powder", compared with GB/T 20686-2006, in addition to editing the main technical changes are as follows.
The glyphosate mass fraction is changed from the specified labeling value to the specified specific value;
- increase the corresponding cation control index and analysis method;
--- increase the nitrite glyphosate control index and the corresponding analysis method;
--- increase glyphosate soluble granules dust control indicators and the corresponding analysis method;
--- Eliminates pH control targets.
This standard is proposed by the China Petroleum and Chemical Industry Association.
This standard is nationalized by the National Pesticide Standardization Technical Committee (SAC/TC133).
The drafting of this standard. Shandong Weifang Runfeng Chemical Co., Ltd., Zhejiang Jinfan Sheng Biochemical Co., Ltd., Zhejiang Xin'an Chemical Group Co., Ltd., Nantong Jiangshan Pesticide Chemical Co., Ltd., Shandong Shengbang Green Chemical Co., Ltd., Hubei Taisheng Chemical Co., Ltd.
Company, Anhui Huaxing Chemical Co., Ltd., Guangxi Pastoral Agrochemical Co., Ltd., Sichuan Chemical Industry Research and Design Institute, Jiangsu good collection Cheng Weien Agrochemical Co., Ltd., Guangxi Chemical Industry Research Institute, Leshan City, Sichuan Fuhua Mastery Pesticide Technology Co., Ltd., Jiangxi Jinlong Chemical Limited company, Shenyang Chemical Industry Research Institute Co., Ltd.
1 Scope
This standard specifies the requirements of the glyphosate soluble powder (granules), the acceptance of the test method, the warranty period and the marking, labeling, packaging and storage.
This standard applies to glyphosate from the original glyphosate or glyphosate soluble salts, carriers and suitable additives from the processing of glyphosate sodium salt, potassium, Ammonium salts, dimethylamine salts, isopropyl ammonium salt soluble powders and soluble granules.
Note. For other names, structural formulas and basic physicochemical parameters of glyphosate and nitroso glyphosate, see Appendix A.
2 Normative reference documents
The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article Pieces. For undated references, the latest edition (including all modifications) applies to this document.
GB/T 685 Chemical reagents Formaldehyde solution Rules for the Acceptance of Agricultural Pesticides Methods of sampling pesticide for agricultural products GB/T 1605-2001 General rules for pesticide packaging Method for determination of wettability of pesticide wettable powder GB/T 5451 Analysis of laboratory water specifications and test methods GB/T 6682-2008 Representation and Judgment of Numerical Correction Rule and Limit Value in GB/T 8170-2008 Method for determination of stability of pesticide thermal stability GB/T 19136-2003 Method for determination of persistent foaming of pesticides GB/T Method for determination of granular pesticide dust GB/T 30360
3 Request
3.1 Composition and appearance
This product should be prepared by the standard glyphosate original drug (or soluble salt), glyphosate soluble powder should be easy to flow of powder, glyphosate the granules should be easily flowable.
3.2 Technical indicators
Glyphosate sodium salt soluble powder should meet the requirements of Table 1, glyphosate potassium salt soluble powder should meet the requirements of Table 2, glyphosate ammonium salt soluble powder should meet the requirements of Table 3, glyphosate isopropylamine salt soluble powder should meet the requirements of Table 4, glyphosate sodium salt soluble granules should meet the requirements of Table 5, grass Glyphosate potassium salt soluble granules should meet the requirements of Table 6, glyphosate ammonium salt soluble granules should meet the requirements of Table 7, glyphosate dimethylamine salt soluble granules should in accordance with Table 8, glyphosate isopropylamine salt soluble granules should meet the requirements of Table 9.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 19 pages — is available in the English PDF.
How to Download GB 20686-2006
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 11118-2026 — Hydraulic fluids (L-HL, L-HM, L-HV, L-HS and L-HG type)
GB 11557-2026 — Provisions for protecting drivers from injury by the steering mechanism of motor vehicles
GB 12021.4-2026 — Maximum allowable values of the energy consumption, water consumption and grades for electric washing machines and washer-dryers
Secure payment via Stripe
Payments accepted
GB 20686-2006
$105.00