GB 20684-2006Glyphosate aqueous solution (English PDF)
草甘膦水剂
This is a limited preview
Buy now to download the full PDF (16 pages)
Need quotation for your management?
Get a formal quotation for GB 20684-2006 in 30 minutes.
Issued by
General Administration of Quality Supervision, Inspection and Quarantine of the People 's Republic of China
Level / Type
National · Mandatory
Issue date
May 31, 2017
Implementation date
December 1, 2017
Scope
GB 20684-2006 is the English-translated version of 草甘膦水剂.
GB 20684-2006 — This standard specifies the requirements, test methods, acceptance and warranty periods of glyphosate water, as well as labeling,, packaging and storage.
This standard applies to glyphosate sodium salt, potassium salt, ammonium salt, dimethylamine salt and salt of glyphosate consisting of glyphosate and salt and water and suitable adjuvant.
Isopropylamine salt. Note. For other names, structural formulas and basic physicochemical parameters of glyphosate and nitroso glyphosate, see Appendix A.
Found what you need?
Document preview — GB 20684-2006
National Standard of the People's Republic of China
- ICS
- 65.100.20
- Classification
- G 25
- Replacing
- GB/T 20684-2006
Issued by: General Administration of Quality Supervision, Inspection and Quarantine of the People 's Republic of China
Contents
- Preface
- 1 Scope
- 2 Normative reference document
- 3 Requirements
- 3.1 Composition and appearance
- 3.2 Technical Specifications
- 4 Test method
- 4.1 General provisions
- 4.2 Sampling
- 4.3 Identification test
- 4.4 Determination of glyphosate mass fraction
- 4.5 Determination of sodium ion, potassium ion, ammonium ion, dimethylamine ion, isopropylamine ion mass fraction
Foreword
This standard is drafted in accordance with the rules given in GB/T 1.1-2009.
This standard instead of GB/T 20684-2006 "glyphosate water agent", compared with GB/T 20684-2006, in addition to editorial changes the technical changes are as follows.
The glyphosate mass fraction is changed from the specified labeling value to the specified specific value;
- increase the corresponding cation control index and analysis method;
- Formaldehyde control index is not more than 10g/kg revised to not more than 0.6g/kg;
--- increase the nitrite glyphosate control index and the corresponding analysis method.
This standard is proposed by the China Petroleum and Chemical Industry Association.
This standard is nationalized by the National Pesticide Standardization Technical Committee (SAC/TC133).
The drafting of this standard. Zhejiang Xin'an Chemical Group Co., Ltd., Nantong Jiangshan Pesticide Chemical Co., Ltd., Zhejiang Jin Fan Da Biochemical Co., Ltd., Leshan City, Sichuan Fuhua Mastery Pesticide Technology Co., Ltd., Anhui Huaxing Chemical Co., Ltd., Guangxi pastoral Chemical Co., Ltd., Zhenjiang Jiangnan Chemical Co., Ltd., Jiangxi Jinlong Chemical Co., Ltd., Hubei Taisheng Chemical Co., Ltd., Jiangsu good harvest Wayne Agrochemical Co., Ltd., Sichuan Huaying Chemical Co., Ltd., Shandong Shengbang Green Chemical Co., Ltd., Guangxi Chemical Industry Research Institute, mountain East Weifang Runfeng Chemical Co., Ltd., Shenyang Chemical Industry Research Institute Co., Ltd.
1 Scope
This standard specifies the requirements, test methods, acceptance and warranty periods of glyphosate water, as well as labeling,, packaging and storage.
This standard applies to glyphosate sodium salt, potassium salt, ammonium salt, dimethylamine salt and salt of glyphosate consisting of glyphosate and salt and water and suitable adjuvant.
Isopropylamine salt.
Note. For other names, structural formulas and basic physicochemical parameters of glyphosate and nitroso glyphosate, see Appendix A.
2 Normative reference documents
The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article Pieces. For undated references, the latest edition (including all modifications) applies to this document.
GB/T 685 Chemical reagents Formaldehyde solution Method for determination of pH value of pesticides GB/T 1601 Rules for the Acceptance of Agricultural Pesticides Methods of sampling pesticide for agricultural products GB/T 1605-2001 General rules for pesticide packaging Method for determination of wettability of pesticide wettable powder GB/T 5451 Analysis of laboratory water specifications and test methods GB/T 6682-2008 Representation and Judgment of Numerical Correction Rule and Limit Value in GB/T 8170-2008 Method for determination of stability of pesticide thermal stability GB/T 19136-2003 Method for determination of low temperature stability of pesticides GB/T 19137-2003
3 Request
3.1 Composition and appearance
This product should be prepared by the standard salt of glyphosate salt, the appearance of a homogeneous liquid, no significant suspended solids and precipitation.
3.2 Technical indicators
Glyphosate sodium salt water agent should meet the requirements of Table 1, glyphosate potassium salt agent should meet the requirements of Table 2, glyphosate ammonium salt water agent should be consistent with Table 3 Preparation, glyphosate dimethylamine salt water agent should meet the requirements of Table 4, glyphosate isopropylamine salt water agent should meet the requirements of Table 5.
Table 1 glyphosate sodium salt water control project indicators
project
index
30% 35% 41% 46%
Glyphosate mass fraction /% 30.0 1.5-1.5 35.0 1.8-1.8 41.0 2.1-2.1 46.0 2.3-2.3 Sodium ion mass fraction a /% >= 3.9 4.5 5.3 5.9
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 16 pages — is available in the English PDF.
How to Download GB 20684-2006
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 11118-2026 — Hydraulic fluids (L-HL, L-HM, L-HV, L-HS and L-HG type)
GB 11557-2026 — Provisions for protecting drivers from injury by the steering mechanism of motor vehicles
GB 12021.4-2026 — Maximum allowable values of the energy consumption, water consumption and grades for electric washing machines and washer-dryers
Secure payment via Stripe
Payments accepted
GB 20684-2006
$85.00