Partners save 15% on every standard

Valid

GB 16999-2010Universal technical requirements of RMB - Banknote discriminating device (English PDF)

人民币鉴别仪通用技术条件

Open the GB 16999-2010 preview as PDF

Preview — first pages of GB 16999-2010 (full document: 26 pages)

This is a limited preview

Buy now to download the full PDF (26 pages)

Issued by

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China; Standardization Administration of China

Level / Type

National · Mandatory

Issue date

September 26, 2010

Implementation date

May 1, 2011

Scope

GB 16999-2010 is the English-translated version of 人民币鉴别仪通用技术条件.

China's mandatory universal technical requirements for renminbi banknote discriminating devices. These are the machines that authenticate banknotes - in an ATM, a counting machine, a vending machine or a teller's counter - and the standard is what fixes how good they have to be. The specification is written around two error rates that trade against each other: a machine that never accepts a counterfeit but rejects genuine notes is unusable at a counter, and one that accepts everything is worse than none. So the requirements set both the counterfeit detection rate and the false rejection rate, tested against defined sets of genuine, worn and counterfeit notes. The features the machine must read are the ones designed into the note - the watermark, the security thread, the magnetic and infrared inks and the ultraviolet response - and the standard also covers the counting accuracy and the handling of worn and taped notes.

Document preview — GB 16999-2010

National Standard of the People's Republic of China

ICS: 03.060
Classification: A90

Issued by: General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China; Standardization Administration of China

1 Scope
2 Normative references
3 Terms and Definitions
4 Classification and model designation
4.1 Classification
5 Requirements
5.1 Identification of performance
6 Test methods
6.2 Main (differential) performance test
18 References

Foreword

All the technical contents of this standard is mandatory. This standard is based on GB/T 1.1-2009 drafting rules for the preparation. The standard technology required to comply with the "Kam false true to false Kam false" technical principles. This standard replaces GB 16999-1997 "identify counterfeit RMB instrument." This standard compared with GB 16999-1997, the main technical change Of the following.

--- The original standard name "identify counterfeit RMB instrument" to "RMB instrument for verifying the general technical conditions" (see cover).

--- Modify the standard range, revised as follows: Circulation of banknotes for automatic identification and point Yanchao Detector products (see Chapter 1).

--- Amendment "definition" as "Terms and Definitions", modify some of the terms and add the term (see Chapter 3).

--- Increasing the product classification method (see 4.1.2).

--- Amendment "technical requirements" to "requirements." Identification of the type of technology has been standardized, divided into light and magnetic identification technology identification technology two class. Added. Identification of the type of technology division table and multispectral image analysis techniques and the highest word identification number identification technology (see

--- Added. identification device life time requirements (see 5.3).

--- Modified "test method" content. Added. ability to identify and drain identification device resolution, resolution error detection using the "test sample" other tests The method (see 6.2.4).

--- Increase A conventional instrument for verifying the performance requirements and test methods Appendix (see Appendix A) normative.

--- Increase Normative Appendix B inspection rules (see Appendix B). This standard by the National Standardization Technical Committee counterfeiting (SAC/TC218) and focal points. This standard was drafted. People's Bank of China monetary gold and silver Bureau, People's Bank of China Printed Science and Technology Institute, Kunming Zi Technology (Hangzhou) Ltd., Ministry of Public Security security product quality supervision and inspection center, the Great Wall notes Financial Equipment Holdings Limited, Zhejiang Weirong Electronic Co., Division, Wenzhou Economic and Technological Development Zone Jingwei Industrial Corporation, Liaoning Julong Financial Equipment Co., Ltd., Shenyang notes Cinda Financial equipment Limited, Shenzhen Best Machinery Electronics Co., Ltd., Hunan Fenghui Kleinwort Technology Co., Ltd., Liaoning University of Science and Technology, Nanjing newly created money detector device Ltd., Suzhou fewer disabilities electronic technology limited liability company, Guangzhou Kang Yi Electronics Co., Ltd., Jiangsu Jinling Machinery Manufacturing Plant (5311 workers Plant), Guangdong PARKnSHOP Baxter Industrial Co., Ltd., Nanjing Polytechnic Speed Bible Technology Co., Ltd., Beijing Science and Technology Co., Ltd. St. Fulun. The main drafters of this standard. Chen Shan, Zheng will warehouse, red wood, Du Xudong, Gu Zi Kun, Yan Yuhua, Zhao Wenshu, Zhang Jian, Hu Zhihong, Wei Wei, Li Yiguang, Zhu Jun, Liu Changqing, Yu Liqun, An Yongguan, Tanwei Ji, Liu Xi, Cui Wenhua, Ye Xinliang, Wu Shixin, Zhuchang right, Fujie Ping, CAI Yong rights, Hu Gang, Zhang Wenfeng, Wang Hengyi. This standard replaces the standards previously issued as follows:

--- GB 16999-1997. RMB identification instrument General technical conditions

1 Scope

This standard specifies the instrument for verifying the renminbi (hereinafter referred to as the differential analyzer) general technical requirements, test methods, inspection rules and signs, packaging, Transportation and storage. This standard applies to the currency notes for automatic identification and point Yanchao Detector products.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 191-2008 Packaging - Pictorial signs

GB/T 2828.1-2003 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch test sample plan

GB/T 2829-2002 periodic inspection Sampling procedures and tables (suitable for process stability test) Determination of the noise source power level reflecting plane free field engineering method

GB/T 3767-1996 Acoustics sound pressure

GB/T 3785-1983 electric sound level meter, acoustic performance and test methods

GB/T 4857.5-1992 Packaging transport package drop test methods

GB 4943-2001 Safety of information technology equipment

GB/T 5080.7-1986 Equipment reliability testing efficiency constant failure rate assumption under the MTBF of the verification test Inspection program

GB/T 6587.4-1986 electronic measuring instrument vibration test

GB/T 6587.5-1986 electronic measuring instruments impact test Limits and methods of measurement of radio disturbance of information technology equipment GB 9254-2008

GB 17625.1-2003 Electromagnetic compatibility - Limits for harmonic current emissions (equipment input current <=16A)

3 Terms and Definitions

The following terms and definitions apply to this document.

3.1 Banknotes banknote (s) People's Bank of China issued according to law, a specific substrate-based printing and circulation of the currency.

3.2 Counterfeit forgedbanknote (s) Forged or altered national currency.

3.3 Test proofs testbanknote (s) Banknotes feature-based, according to the identification device test requirements by the People's Bank of China made uniform number of test samples, and (or) by the Chinese people China Bank collection, identification, grouping counterfeit proofs.

3.4 Dynamic Identification dynamicdiscrimination Continuous automatic identification of genuine and fake banknotes manner.

3.5 Static differential staticdiscrimination Automatic identification of individual notes genuine way.

3.6 Identification device banknotediscriminatingdevice Detector and point Yanchao.

3.6.1 Point Detector currencycounter Press the motion discriminating manner inspection of banknotes equipment (sorter, except for self-service equipment).

3.6.2 Yanchao currencydetector By way of a bill discriminating static identification instruments.

3.7 Drain resolution un-discriminationerrorrate Zhang did not distinguish the number of counterfeit money and the actual number of copies of counterfeit inventory ratio.

3.8 Error resolution mis-discriminationerrorrate Zhang Zhen number of counterfeit coins identified as genuine bill and the actual inventory count sheets ratios.

3.9 Crown word number identification characterrecognition In the inspection of the process, the number of banknotes crown word identification, recording function.

3.10 Crown word number misrecognition characterrecognitionerror Individual notes crown word number in any one character recognition when an error occurs as false consciousness.

3.11 Crown word number error rate charactermis-discriminationerrorrate Misrecognition occurs crown word number and the actual number of bills to identify the number of the bill ratio.

4.1 Classification

4.1.1 Identification divided into point Detector (dynamic mode, represented by D) and Yanchao (static, expressed in J) categories.

4.1.2 by using anti-counterfeiting technology and the ability to identify the corresponding evaluation results sub-A grade, B grade, C grade three levels, A being the highest. Equipment Body classification approach in Table 2 and Table 3.

4.2 Model methodology (example) JBY The first letter of the instrument for verifying the "Kam", "Do not", "instrument" pinyin Categories (indicated by D or J) ××××××× It refers to the product features, design or modify the serial number, the manufacturer may require its own. (×) (Reserve grade product number)

5.1 Identification of performance

5.1.1 Identification of the type of technology and identification of performance Instrument for verifying the identification of the type of technology division are shown in Table 1, the main (differential) performance and classification Table 2 and Table 3. Table

1 Identification of the type of technology No. Item No. Item 1 UV fluorescence image analysis identification techniques

7 Characteristics of identification techniques 2 white image analysis identification techniques 8 magnetic security thread feature analysis identification techniques 3 IR image analysis image analysis identification techniques 9 magnetic identification technology

4 Multi-spectral image analysis identification techniques 10 magnetic characteristics qualitative identification techniques 5 ultraviolet optical characteristics of identification techniques 11 crown word number identification technology 6 infrared optical characteristics of identification techniques 12 other authentication technology

5.1.2 ability to identify Discrimination capability is determined by the use of identification technology. Discrimination capability classification Table 2 and Table 3. Ability to identify technical requirements.

a) During use, the identification device should be free from any outside interference, reducing the ability to identify;

b) the ability to identify (or test data issued by the testing, evaluation reports) is valid, generally defined as two years. Forcibly if necessary increase Detection times.

5.1.3 Identification speed Detector urged all of the identifying feature is turned on when the operating speed. Its indicators in Table 2. Indicator

5.1.4 leak resolution and the resolution of the error Point Detector leak error resolution and the resolution of the indicators in Table 2, leak indicators Yanchao resolution and resolution of error in Table 3. Table

2.00 Detector Main (identification) and performance rating No. Item Claim A Class B C grade An ability to identify (identification techniques, species) >=9 >=5 >=4 2 coupons do not, and do not cover other version of recognition with three having the ability to identify a method of identifying at least limited capacity Identification speed / (Sheets/min) The long side into the money when >=900 When the short side into the money >=350 When the crown word number identification >=700 >=500 Any 4 leak Resolution /% <=0.015 <=0.03 5 error resolution /% <=0.02 <=0.05 6 crown word number error rate /% (in the case) <=0.03

7 tips have counterfeit money

8 conventional capabilities

The number of display digits >=4 >=3 bill Taiwan to send money and the main ground station tolerance notes Volume/Zhang >=130 Wrong point rate a /% <=

0.001 Continuous working time/h >=4 (inspection of the bill less than 200 000) Table

6 Test methods

6.1 Identification number Identification number is divided into.

a) A grade point Detector bill discriminating either side once again as identification; B, C grade point Detector banknotes pros and cons of each discrimination a To identify a sub-set.

b) according to the provisions of the bill Yanchao orientation discrimination is discrimination once again.

6.2 Main (differential) performance test

6.2.1 ability to identify (identification of the type of technology) Test Method

6.2.1.1 visual method Check Point Detector with visual method, the detection device Yanchao on the use of the type and number of sensors, record the results in Table 1 project.

6.2.1.2 Instrument Test Method 6.2.1.2.1 preparation Use point Detector can be connected to the image data output port on the computer or on Yanchao, real-time transmission of images or data to the computer Machine, point Yanchao Ji, Yanchao ability to identify (identification of the type of technology) for testing and analysis. 6.2.1.2.2 return complete test coupons Return to full use coupons when tested with the relevant test application software for computer-aided evaluation. Each registering coupons do not return to full coupon Each using one of the points Detector, Yanchao test 3 times and record the output data and results. 6.2.1.2.3 Evaluation of test results Evaluation of the test results are divided into.

a) Table 1 of the first item on 1,2,3,4-spectral image identification technology, should be able to output full width, 25dpi resolution on your computer , The spectral characteristics of the image that contains the relevant bill for two, and each test at least once to achieve this requirement, then the Having associated spectral image identification technology.

b) to Table 1, the first item on 5,6,7,10 and magnetic characteristics of the optical characteristics of qualitative identification technology, should be able to output the bill on a computer Related optical and magnetic characteristics, each test at least once to achieve this, it shows that it has the relevant optical characteristics of And the magnetic characteristics of qualitative identification technology.

c) to Table 1, item 8 on the magnetic security thread feature analysis identification techniques, should be able to complete the computer output on a magnetic signal waveform, Test at least once to achieve this, it shows that having a magnetic security thread feature analysis identification techniques.

d) of Table 1, item 9 on the magnetic image analysis identification techniques, the computer should be able to output full frame image magnetic spectrum, at least test 1 to achieve this, it shows that it has a magnetic image analysis identification techniques.

e) Table 1 in paragraph 11 crown word number identification technology, A class test machine 1, B, C class testing machine three times a particular orientation, should be able to Output identification number on the computer crown word (print record) test at least once to achieve this, it shows that having a crown Word number identification technology.

f) of Table 1, item 12 other identification techniques, testing methods provided by the manufacturer for testing.

6.2.2 coupons do not, do not test suite version and other recognition capabilities

6.2.2.1 coupons do not recognize 6.2.2.1.1 Detector point coupons do not recognize In 90 one kind of tickets do not bill, using 2 sheets of continuous and discontinuous mode with 10 different sets of other coupons do notes, test 10 times, press Table 2 records requirements of the project results. 6.2.2.1.2 Yanchao coupons do not recognize With different sets of coupons for other bills do not test five times, according to the project requirements in Table 3 records the results.

6.2.2.2 Do not set recognition 6.2.2.2.1 Detector point sets do not recognize In 90 one kind of another bill sets, using 2 sheets of continuous and discontinuous mode with 10 different sets of coupons else do notes, test 10 times, press Table 2 records requirements of the project results. 6.2.2.2.2 Yanchao sets do not recognize With different sets of coupons other bills do not test, the test five times, according to the project requirements in Table 3 records the results. Version

6.2.2.3 do not recognize Do not point 6.2.2.3.1 Detector Version Identification In one version of. 90 other bills, using 2 sheets of continuous and discontinuous way to join 10 other sets of the same, with a different version do not bill other coupons, Test 10 times, according to the requirements of Table 2. The results of the project record. 6.2.2.3.2 Yanchao Edition do not recognize Do not set the same, with a different version of the other bills other coupon test, the test five times, according to the project requirements in Table 3 records the results.

6.2.3 Detector point differential speed When in the fully open state discrimination function, the complete return of 100 yuan denomination coupons accumulated 1800 test measured differential Rooms, record the results, according to the formula (1) to calculate the differential speed. vj = Zt (1) Where. vj

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 26 pages — is available in the English PDF.

Referenced standards

Normative references

GB/T 3767-1996 · GB/T 3785-1983 · GB/T 4857.5-1992 · GB 4943-2001 · GB/T 5080.7-1986 · GB/T 6587.4-1986 · GB/T 6587.5-1986 · GB 9254-2008 · GB 17625.1-2003

How to Buy GB 16999-2010

1Add to cart. Click the "Buy GB 16999-2010" button on this page. You can add more standards before checkout.
2Checkout. Enter your email and billing details. Payment is processed securely by Stripe (cards, Apple Pay, Google Pay supported).
3Instant delivery (0–9 sec). Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4Invoice included. A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.