GB 10282-2008Machinery for forestry -- Portable pneumatic fire extinguisher -- Safety code of practice (English PDF)

3.1 Basic requirements

3.1.1 Firefighting equipment non-standard non-team wind extinguishing equipment. Operator found not complying with GB/T 10280 and (or) LY/T 1719 of Wind extinguishing equipment, the right to refuse to use.

3.1.2 The operator should be trained before induction.

3.1.3 The operator should be read carefully before using the fire fighting equipment used by the operating instructions, familiar with its features and controls.

3.1.4 The following persons are not allowed to use fire-fighting equipment.

a) minors and the elderly;

b) the sick deformed and weak people;

c) influence of alcohol or taking stimulants, narcotics person.

3.1.5 The operator at the job site fire, fire should wear protective clothing, protective boots, wearing a fire helmet (protective glasses) and protective gloves.

3.2 Preparation

3.2.1 operator before firefighting operations on the pneumatic extinguisher used (wind water fire extinguisher) to regularly check and found that failure to timely exclude.

3.2.1.1 Electrical system should ensure the normal, no leakage and short circuit.

3.2.1.2 fuel supply system should ensure the smooth flow of oil, no oil leakage.

3.2.1.3 Wind extinguishers shall GB/T 10280 regulations do start test, should smooth start within 30s success.

3.2.1.4 Wind extinguishers shall GB/T 10280 regulations, since the level up, down, left and right tilt 90 ° (carrying fire extinguishers should be front, back, Left and right tilt 45 °) can work properly.

3.2.1.5 As with wind water fire extinguisher, but also to ensure the reservoir and plumbing connections without loosening and leakage, reliable connection, the reservoir strap prison Rely on water quantity standard.

3.2.2 Random alternate fuel shall be specified in the instructions mixing ratio mix evenly loaded into special containers and placed in a cool and safe the whole place.

3.2.3 should be a safe place away from sources of ignition fuel, may not have near the fire, non-smoking.

3.2.4 should use a dedicated container and funnel refueling.

3.2.5 Refueling should be finished immediately wipe the surface residual wind extinguishers.

3.2.6 Tighten the fuel tank cap, flip any wind extinguishers should be no leakage.

3.2.7 Fuel spilled on the ground, the wind extinguishers need to be moved to safe prescription start if refueling.

3.3 Firefighting jobs

3.3.1 The operator according to the actual situation of the scene, to ensure its own security conditions, can choose to use wind or wind fire sprinkler.

3.3.2 When extinguishing operations to as a group.

3.3.3 foreign objects into the fan housing should be promptly removed; for the wind water fire extinguisher, to ensure the smooth flow of the water reservoir and pipes.

3.3.4 In the extinguishing process required to add fuel, in addition to compliance with the provisions of 3.2.3 - 3.2.6 should be shut down, as far as possible in the upwind or downwind side Come on.

3.3.5 or went to the scene transitions, pneumatic fire extinguisher fuel tank should be emptied within.

3.3.6 Wind extinguishers for other purposes when the job, according to the relevant safety procedures implemented.

3.4 Maintenance and storage

3.4.1 stop, according to the use and maintenance instructions, cool, dry environment, non-collision, extrusion.

3.4.2 fire extinguisher of the wind should be regularly checked, maintenance and commissioning.

3.4.3 Wind extinguishers long-term storage, should be done.

a) exhausted fuel tank and carburetor fuel;

b) by the use of specification requirements for maintenance, to reach good condition; check at least once every quarter, starting once;

c) packing or storage overhead storage, pay attention to moisture.