Valid

GA/T 403.1-2014Information security technology. Security technical requirements for intrusion detection products. Part 1: Network-based products (English PDF)

Preview PDF

This is a limited preview

Buy now to download the full PDF (20 pages)

Need quotation for your management?

Get a formal quotation for GA/T 403.1-2014 in 30 minutes.

Issued by

Ministry of Public Security

Level / Type

National · Recommended

Issue date

January 1, 1970

Implementation date

January 1, 1970

Scope

GA/T 403.1-2014 (Information security technology. Security technical requirements for intrusion detection products. Part 1: Network-based products) is available as an English-translated PDF.

GA/T 403.1-2014 — GA/T 403 provisions of this part of the network-based intrusion detection products, security functional requirements, security assurance requirements and grading requirements.

This section applies to the design, development and testing network-based intrusion detection products.

Found what you need?

Document preview — GA/T 403.1-2014

National Standard of the People's Republic of China

ICS
35.240
Classification
A 90
Replacing
GA/T 403.1-2002

Issued by: Ministry of Public Security

Contents

  • Introduction
  • Introduction
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Abbreviations
  • 5 Network Intrusion Detection Product Description
  • 6 Security Environment
  • 6.1 Hypothesis
  • 6.2 Threat
  • 4 6.3 Organization for Security Policy
  • 7 Security purposes
  • 7.1 Product Safety Objective
  • 7.2 Environmental security objectives
  • Security functional requirements 8
  • 8.1 Data acquisition capabilities in claim
  • 8.2 Intrusion analysis Claim
  • 8.3 Intrusion Response 6 Functional requirements
  • 8.4 Management Control functional requirements
  • 8.5 7 processing requirements of the test results
  • 8.6 Product flexibility requirements
  • 8.7 Identification
  • 8.8 Management 9 Administrator
  • 8.9 Security Audit
  • 8.10 Event Data Security
  • 8.11 Communication Security
  • 8.12 Security 10 product itself
  • 9 Security assurance requirements
  • 9.1 Configuration Management
  • 9.2 Delivery and Operation
  • 12 9.3 Development
  • 9.4 Guidance document
  • 14 9.5 Life Cycle Support
  • 9.6 Test
  • 9.7 Vulnerability assessment
  • 10 Basic principles of technical requirements
  • 10.1 16 basic principles of security functional requirements
  • 10.2 18 basic principles of security assurance requirements
  • 11 Classification requirements
  • 11.1 Overview
  • 11.2 Classification of security functional requirements
  • 11.3 Classification of security assurance requirements

Foreword

GA/T 403 "information security technology intrusion detection product safety technical requirements" is divided into two parts.

--- Part 1. network products;

--- Part 2. Host products.

This section GA/T Part 1 403.

This section drafted in accordance with GB/T 1.1-2009 given rules.

This Part replaces GA/T 403.1-2002 "IT intrusion detection products safety - Part 1. network products", Compared with GA/T 403.1-2002 main technical changes are as follows.

--- Standard name was changed to "information security technology intrusion detection products - Safety requirements - Part 1. Network products";

--- Increased network intrusion detection product description (see Chapter 5);

--- Increase the security environment, including the assumptions, threats and organizational security policies (see Chapter 6);

--- Increased security purposes, including the purpose of product safety and environmental safety purposes (see Chapter 7);

--- Remove the network intrusion detection product performance requirements (see the 2002 edition, Chapter 7);

--- Deleted the database support (see the 2002 edition of 6.1.5.5);

--- Modify the content of security functional requirements (see Chapter 8, Chapter 8, 2002 edition);

--- Increase the technical requirements of the basic principles, including the basic principles of security functional requirements and security assurance requirements for the basic principles (see Chapter 10).

Please note that some of the content of this document may involve patents. Release mechanism of the present document does not assume responsibility for the identification of these patents.

This part is proposed by the Ministry of Public Security Network Security Protection Agency.

This part of the jurisdiction of the Ministry of Public Security Information System Standardization Technical Committee.

This section drafted by. Ministry of Public Security of Computer Information System Security Product Quality Supervision and Inspection Center, Blue Shield Information Security Technology Co. Shares Companies, Third Institute of Ministry of Public Security.

Introduction

GA/T 403 is described in detail in this section of the network-based intrusion detection products and security environment related assumptions, threats and organizational security policies Strategy, defines the purpose of network security intrusion detection products and their supporting environment, demonstrated by the basic principles of security functional requirements and can be traced back Products covered security purposes, for security purposes can be traced back cover and secure environment-related assumptions, threats and organizational security policies.

This section basically level with reference to the GB/T 18336.3-2008 prescribed level EAL2 security assurance requirements, and enhance the level at EAL4 level Security assurance requirements based on the vulnerability analysis requires upgrade to an attacker can withstand moderate attack potential attack.

This section only gives a network-based intrusion detection products should meet the technical requirements of safety, but network-based intrusion detection products of specific skills Art implementations, a method is not required.

Information Security Technology Intrusion detection products safety technical requirements Part 1. Network products

1 Scope

GA/T 403 provisions of this part of the network-based intrusion detection products, security functional requirements, security assurance requirements and grading requirements.

This section applies to the design, development and testing network-based intrusion detection products.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.

GB 17859-1999 computer information system security protection classification criterion GB/T 18336-2008 (all parts), Information technology - Security techniques - Information Technology Security Evaluation Guidelines GB/T 25069-2010 Information security technology terms

3 Terms and Definitions

GB 17859-1999, GB/T 18336-2008 (all parts) and GB/T 25069-2010 defined and the following terms and definitions Meaning applicable to this document.

Intrusion

Any attempt to harm the integrity of resources, confidentiality or availability of behavior.

Detector sensor

Collection may indicate intrusions or misuse of information system resources in real-time event, and the information collected for preliminary points Analysis of network-based intrusion detection product components. Installed at key nodes in the network, and monitor data flowing through the network.

Console managementconsole Detector for management, policy configuration, data management, alarm management, incident response, as well as other event repository upgrade management, and the Invasion behavior of intrusion detection system components in-depth analysis. A console can manage multiple detectors.

Attack signatures attacksignature Intrusion detection systems pre-defined information can be found in a specific attack is happening.

Alarms alert

When the attack or invasion, intrusion detection system, emergency notification issued to the authorized administrator.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 20 pages — is available in the English PDF.

Referenced standards

How to Download GA/T 403.1-2014

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
20 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GA/T 403.1-2014

$884.00