GA/T 172-1998Metallic handcuffs (English PDF)

Foreword

All the technical contents of this standard is mandatory.

This standard was drafted in accordance with GB/T 1.1-2009 given rules.

Since the implementation of this standard at the same time instead of GA/T 172-2005 "metal handcuffs." this standard compared with GA/T 172-2005, the main changes are as follows.

--- Change to mandatory standards recommended by the standards;

--- Add or modify some of the terms and definitions (see Chapter 3);

--- Increased metal handcuffs classification (see 4.1);

--- Modified metal handcuffs code composition (see 42, 2005 3.3.);

--- Modify the appearance of metal handcuffs technical requirements (see 51, 2005 version 4.1.);

--- Increase the technical requirements of the metal handcuffs structure (see 5.2);

--- Increase the technical requirements of the metal handcuffs mark (see 5.3);

--- Modify the size of the metal handcuffs technical requirements (see 54, 2005 version 4.3.);

--- Modified metal handcuffs quality technical requirements (see 55, 2005 4.2.);

--- Modified metal handcuffs flexibility of technical requirements (see 56, 2005 version 4.4.);

--- Modified metal handcuffs locked targeting technical requirements (see 57, 2005 4.5.);

--- Modified metal handcuffs against dials the performance of the technical requirements (see 58, 2005 4.6.);

--- Increasing the reinforced metal handcuffs strength of the technical requirements (see 5.9.5);

--- Corresponding increase or modification of the test methods (see Chapter 6).

This standard was proposed by the Ministry of Public Security Prison Administration Bureau.

This standard by the Ministry of Public Security Special Police Equipment Standardization Technical Committee.

This standard was drafted. Prison Ministry of Public Security Bureau, the Ministry of Public Security Special Police Equipment Quality Supervision and Inspection Center, Chengdu Jin-equipment limited Ltd., Chengdu Heng Police Equipment Manufacturing Co., Ltd., Yantai Asahi days Police Equipment Co., Ltd., Chongqing Science and Technology Co., Ltd. Shuai.

1 Scope

This standard specifies the terms and definitions of metal handcuffs, classification and code, technical requirements, test methods, inspection rules, packaging, transport and Storage.

This standard applies to the metal handcuffs research and development, production and testing.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.

GA 975-2012 Special Police Equipment Terminology

3 Terms and Definitions

The following terms and definitions apply to this document.

Metal handcuffs metalichandcuffs Metal chain connected to the wrist shackles armed with metal ring.

NOTE. rewrite GA 975-2012, definitions 4.3.1.

Sheet metal handcuffs platemetalichandcuffs Metal handcuffs handcuffed body connector plate structure.

NOTE. rewrite GA 975-2012, definitions 4.3.1.1.

Drum metal handcuffs columnmetalichandcuffs Handcuffed body connector is metal handcuffs drum structure.

NOTE. rewrite GA 975-2012, definitions 4.3.1.2.

Locked positioning doublelocking Metal handcuffs fan beam can not rotate, while maintaining the functions of a state of engagement.

Handcuffed Spacing handcuffdistance when fully expanded metal handcuffs, shackled around the center of the distance between the body.

Anti-allocated net working time workingtimeformanipulationresistancetest Time Actual performance test for anti-allocated, including the tools to transform the time, but does not include possible delays in the testing process