GA 526-2010Supervision room doors (English PDF)

Foreword

All the technical contents of this standard is mandatory.

This standard was drafted in accordance with GB/T 1.1-2009 given rules.

This standard is GA 526-2005 "prison room door" revision, compared with GA 526-2005 main changes are as follows.

--- Increasing the prison door is closed, doors, electric doors and definition composite structure prison compartment door electric control room monitor prison cells (see 3.6 to 3.9);

--- Revised classification prison room door and the corresponding code representation (see 4.1, 4.2);

--- Added chamber within the prison door leaf surface, steel skeleton, filling requirements (see 5.1);

--- Pan prison for peaceful room door room door open prison doors clear channel size made uniform provisions (see 5.2.7);

--- Increasing the electric prison chamber door technical requirements (see 5.5);

--- Increased the prison door is electronically controlled technical requirements (see 5.6);

--- Added configured on the gatekeeper room electronic locks, electric locks and external locking device requirements (see 5.7);

--- Modify the prison doors room door and the door rail vandal requirements, test net working time (see 5.8.1,5.8.2);

--- Modify the prison door is recessed door crash test residual deformation requirements (see 5.8.3);

--- Increased use of electric prison room door motor safety requirements (see 5.9).

This standard was proposed by the Ministry of Public Security Prison Administration Bureau.

This standard by the Ministry of Public Security Special Police Equipment Standardization Technical Committee.

This standard was drafted. Prison Ministry of Public Security Bureau, the Ministry of Public Security Special Police Equipment Quality Supervision and Inspection Center, Fujian Provincial Public Security prison Administration Corps, Jiangsu Provincial Public Security Corps Prison, Liaoning Province Public Security Prison Corps, Fujian Pucheng Blue Shield Special Equipment Co., Division Nanjing TV Electronic Technology Co., Ltd. Jingjiang City Sunrise security engineering, security doors and windows Co., Ltd. Shenyang defender.

1 Scope

This standard specifies the terms and definitions prison compartment door, and classification code, technical requirements, test methods, inspection rules and signs, packaging, transportation and storage.

This standard applies to the use of prison detention center compartment door production and testing.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.

GB 16796-2009 security alarm equipment safety requirements and test methods for prevention GB 17565-2007 anti-theft security door general technical conditions GA/T 73-1994 mechanical anti-theft lock GA 374-2001 electronic locks GA 576-2005 Anti trailing linkage interlocking security door general technical conditions

3 Terms and Definitions

The following terms and definitions apply to this document.

Sitting for detainees, metal door activities and places of confinement. The frames, doors, locking device, transmission or drive mechanism and other components.

Frames, doors for the overall structure, doors open outwards prison door.

Frames, doors, door shaft for the overall structure, the door open, the door locking device provided in the axis direction, outwardly open prison door.

Frames, doors for the overall structure, leaf moves along the rail prison door.

Frames, doors for the overall structure, fixed by a plurality of gate doors stick composition prison door.

Frames, doors for the overall structure, in addition to observe the door out of the window are non-see-through material made prison door.