FZ/T 93048.1-2021Needles for needle loom - Part 1: Felting needles (English PDF)
针刺机用针 第1部分:刺针
This is a limited preview
Buy now to download the full PDF (14 pages)
Need quotation for your management?
Get a formal quotation for FZ/T 93048.1-2021 in 30 minutes.
Issued by
Ministry of Industry and Information Technology of the People’s Republic of China
Level / Type
National · Recommended
Issue date
April 19, 2021
Implementation date
July 1, 2021
Scope
FZ/T 93048.1-2021 is the English-translated version of 针刺机用针 第1部分:刺针.
FZ/T 93048.1-2021 - This Part of FZ/T 93048 specifies the terms and definitions, classification and basic structure, dimensions and characteristics, and marking of felting needles.
This Part is applicable to triangular felting needles and special-shaped cross-section felting needles for needling and consolidating nonwoven fabrics (hereinafter referred to as the felting needles).
Found what you need?
Document preview — FZ/T 93048.1-2021
National Standard of the People's Republic of China
- ICS
- 59.120.99
- Classification
- W 93
Issued by: Ministry of Industry and Information Technology of the People’s Republic of China
Contents
- Foreword...3
- 1 Scope...5
- 2 Terms and Definitions...5
- 3 Classification and Basic Structure...6
- 4 Dimensions and Characteristics...7
- 5 Markings...11
- Appendix A (informative) Supplementary Codes of Felting Needles...14
Foreword
FZ/T 93048 Needles for Needle Loom is planned to be published in parts. The following parts
are currently planned to be published:
---Part 1: Felting Needles;
---Part 2: Fork Needles;
---Part 3: Tapered Needles;
......
This is Part 1 of FZ/T 93048.
This Standard was drafted in accordance with the rules provided in GB/T 1.1-2009.
This Part serves as a replacement of FZ/T 93048-2010 Felting Needles. In comparison with
FZ/T 93048-2010, the main technical changes are as follows:
---Four terms, including "same edge barb distance" are deleted (see Chapter 2; Chapter 2
of Version 2010);
---The parameters of the felting needles coded 9 and 10 are added, the description of the
working part section height of the felting needles with non-triangular cross-sections is
added, and the parameters of individual felting needles are adjusted (see Table 1; Table
1 of Version 2010);
---The specifications of felting needles with a nominal length of 80 mm are added (see
Table 2; Table 2 of Version 2010);
---The technical requirements for felting needles are modified into the expression in terms
of "characteristics" (see 4.2; Chapter 4 of Version 2010);
---The representation of the number of edge barbs of special felting needles is added (see
5.1);
---The test methods, inspection rules, marking, packaging, transportation and storage are
deleted (see Chapter 5, Chapter 6 and Chapter 7 of Version 2010);
---Other editorial modifications.
This Part was proposed by China National Textile and Apparel Council.
This document shall be under the jurisdiction of Non-woven Machinery Subcommittee of
National Technical Committee on Textile Machinery and Accessories of Standardization
Administration of China (SAC/TC 215/SC 3).
Needles for Needle Loom - Part 1: Felting Needles
1 Scope
This Part of FZ/T 93048 specifies the terms and definitions, classification and basic structure,
dimensions and characteristics, and marking of felting needles.
This Part is applicable to triangular felting needles and special-shaped cross-section felting
needles for needling and consolidating nonwoven fabrics (hereinafter referred to as the felting
needles).
2 Terms and Definitions
The following terms and definitions are applicable to this document.
2.1 felting needles
An important device on a needle loom that utilizes its barb to repeatedly puncture the fibers in
the fiber web or the yarns in the fabric to entangle and consolidate to achieve or form surface
functional transformation.
2.2 nominal length
The distance from the tip of the needle to the inside of the crank.
2.3 working part
The working part of the felting needles.
2.4 edge
The naturally formed ridge line of the working part section shuttle.
2.5 barb
The depressions and peaks on the edge of the working part used to hook fibers.
2.6 undercut angle
The included angle between the top surface of the barb and the cross-section of the working
part.
2.7 kick-up
The part of the barb above the edge.
2.8 barb depth
The vertical distance of the barb below the edge.
2.9 barb distance
The distance between two adjacent barbs on the same edge.
2.10 distance from tip to the first barb
The distance from the tip of the needle to the first barb on the first edge.
2.11 crank
A part used for positioning, and at 90° to the needle handle.
2.12 crank position angle
The included angle between the symmetrical centerline of the cross-section of the working part
and the axis of the crank shaft.
2.13 working part section height
The distance from the bottom to the top of the cross-section of the working part.
2.14 point style
The shape of the felting needle tip.
The point style of the felting needles is shown in Table A.1.
3 Classification and Basic Structure
3.1 Classification
In accordance with the structural characteristics, the felting needles can be classified into the
following types:
---triangular felting needles;
---tapered felting needles;
---rhombus felting needles;
---other special-shaped needles.
3.2 Basic Structure
The basic structure of the felting needles is shown in Figure 1.
......
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 14 pages — is available in the English PDF.
How to Download FZ/T 93048.1-2021
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
FZ/T 93048.2-2021 — Needles for needle loom - Part 2: Fork needles
FZ/T 93048.3-2023 — Needles for acupuncture machines - Part 3: Tapered needles
FZ/T 01002-2025 — Calculation method and basic quota of comprehensive energy consumption for dyeing and printing enterprises
Secure payment via Stripe
Payments accepted
FZ/T 93048.1-2021
$225.00