Valid

FZ/T 90107.1-1999Cylindrical tubes. Recommended main dimensions (English PDF)

圆柱形筒管主要尺寸推荐值

Preview PDF

This is a limited preview

Buy now to download the full PDF (8 pages)

Need quotation for your management?

Get a formal quotation for FZ/T 90107.1-1999 in 30 minutes.

Issued by

State Bureau of Textile Industry

Level / Type

National · Recommended

Issue date

November 19, 1999

Implementation date

December 1, 1999

Scope

FZ/T 90107.1-1999 is the English-translated version of 圆柱形筒管主要尺寸推荐值.

FZ/T 90107.1-1999 is the Chinese standard "Cylindrical tubes. Recommended main dimensions". It was issued by State Bureau of Textile Industry. Issued on 11/19/1999, in force from 12/1/1999. It cites 5 other standards.

Found what you need?

Document preview — FZ/T 90107.1-1999

National Standard of the People's Republic of China

ICS: 59.12
Classification: W90

Issued by: State Bureau of Textile Industry

[Preview only]
1 Scope
2 Normative references
2.1 Terms
3 Terms and Definitions
4 Requirements
6 Test methods
7 Inspection rules
8 Judgment rules
9 Test report

1 Foreword

FZ/T 90107.1-1999 was issued by State Bureau of Textile Industry on 19 November 1999 and has been in force since 1 December 1999.

It is one of 7 parts of the FZ/T 90107 series.

The FZ/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

FZ/T 90107.1-1999 falls under ICS 59.12, in the field of textile and leather technology.

This catalogue holds 1,720 other FZ/T standards in that field.

In this catalogue, FZ/T standards carry edition years from 1991 to 2025.

3 Normative references

The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document.

FZ/T 90107.2-1999 — Cylindrical tubes. Dimensions, tolerances and designation of tubes for open-end spinning machines

FZ/T 90107.3-1999 — Cylindrical tubes. Dimensions, tolerances and designation of tubes for tape yarns

FZ/T 90107.4-1999 — Cylindrical tubes. Dimensions, tolerances and designation of tubes for textured yarns

FZ/T 90107.6-1999 — Cylindrical tubes. Dimensions, tolerances and designation of tubes for crosswound packages in winding and twisting

FZ/T 90107.7-1999 — Cylindrical tubes. Dimensions, tolerances and designation of perforated tubes for cheese dyeing

4 Where this standard sits

FZ/T 90107.1-1999 is classified under ICS 59.12, in the field of textile and leather technology.

It cites 5 standards, among them FZ/T 90107.2-1999, FZ/T 90107.3-1999, FZ/T 90107.4-1999, listed in full above.

It is one part of the FZ/T 90107 series, of which this catalogue holds 7 parts.

5 About this standard

Issued by: State Bureau of Textile Industry

English translation: about 8 pages (approximate)

6 Related standards

Other parts of this standard:

FZ/T 90107.2-1999 — Cylindrical tubes. Dimensions, tolerances and designation of tubes for open-end spinning machines

FZ/T 90107.3-1999 — Cylindrical tubes. Dimensions, tolerances and designation of tubes for tape yarns

FZ/T 90107.4-1999 — Cylindrical tubes. Dimensions, tolerances and designation of tubes for textured yarns

FZ/T 90107.5-1999 — Cylindrical tubes. Dimensions, tolerances and designation of tubes for continuous spin-drawn synthetic filament yarns

FZ/T 90107.6-1999 — Cylindrical tubes. Dimensions, tolerances and designation of tubes for crosswound packages in winding and twisting

FZ/T 90107.7-1999 — Cylindrical tubes. Dimensions, tolerances and designation of perforated tubes for cheese dyeing

Standards on related subjects:

FZ/T 93048.1-2021 — Needles for needle loom - Part 1: Felting needles

FZ/T 93019-2004 — Flat fillet clothing for carding process

FZ/T 90113-2023 — Textile needles - test method for abrasion resistance

FZ/T 90089.2-2021 — Textile machinery nameplate - Part 2: Information

FZ/T 90089.1-2021 — Textile machinery nameplate - Part 1: Types, dimensions and specifications

7 Classification and status

International classification (ICS): 59.12

Chinese Standard Classification (CCS): W 90

Prefix FZ/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 8 pages — is available in the English PDF.

Referenced standards

Normative references

How to Download FZ/T 90107.1-1999

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.