FZ/T 90088-2017Test method of anti clogging ability for textle motor (English PDF)

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009.

This standard is FZ/T 90088-1996 "textile motor anti-clogging ability of the test method," the amendment, and FZ/T 90088-Compared to 1996, except for editorial changes, the main technical contents are as follows.

--- Increase the requirements of the test power (see 4.1);

--- Increased requirements for measuring instruments (see 4.3);

--- Increased measurement of room temperature requirements (see 5.2);

--- Increased motor thermal stability of the state of the provisions (see 5.3);

--- Increased use of dynamometers to test the way the motor load (see 6.1);

--- Increased three-phase permanent magnet synchronous motor test method (see 6.2).

This standard proposed by the China Textile Industry Federation.

This standard by the National Textile Machinery and Accessories Standardization Technical Committee (SAC/TC215) centralized, the national industrial machinery electrical system standard Standardization Technical Committee Textile Machinery Electrical System Sub-Technical Committee (SAC/TC231/SC1) professional focal point.

This standard was drafted unit. Qingdao and Electric Power Co., Ltd., Weinan Qing Feng Technology Co., Ltd., Jiangsu Ansett Electrical and Mechanical Technology Co., Ltd., Light Industry Hangzhou Mechanical and Electrical Design Institute.

1 Scope

This standard specifies the test method of anti-clogging capacity of textile motors.

This standard applies to textile, motor (hereinafter referred to as motor) for driving textile machinery and equipment under multi-fiber, high-humidity environment.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this article Pieces. For undated references, the latest edition (including all amendments) applies to this document.

GB/T 1032 three-phase asynchronous motor test method GB/T 22669 three phase permanent magnet synchronous motor test method

3 Terms and definitions

The following terms and definitions apply to this document.

4 Test equipment and measuring instruments