FZ/T 34006-2016Printed and dyed jute fabrics (English PDF)

Foreword

This standard is drafted in accordance with the rules given in GB/T 1.1-2009.

This standard replaces FZ/T 34006-2009 "jute printing cloth", compared with FZ/T 34006-2009 main changes are as follows.

--- range from "applicable to the identification of jute content of 20% and above blended and interwoven product quality" to "for identification of woven drift White, dyeing and printing jute "(see Chapter 1);

--- increase the classification chapter (see Chapter 3);

- technical requirements in the inherent quality of increased wear resistance, seam slip assessment project (see 4.2);

--- quality grade from excellent, first-class goods, second-class goods to excellent products, first-class goods and qualified products (see 4.3);

The locality defect score is changed from 10 points to 4 points (see 4.5.3.1);

- Add Appendix A, Appendix A to Appendix B.

This standard is proposed by China Textile Industry Federation.

This standard is under the jurisdiction of the National Textile Standardization Technical Committee of Hemp Textile Division (SAC/TC209/SC4).

The main drafting unit of this standard. Hangzhou Zhuo Da Dyeing and Finishing Co., Ltd., Heilongjiang Province, textile products Quality Supervision, Inspection and Testing Center, Jiujiang silver Fan Textile Co., Ltd., Jilin Province Product Quality Supervision and Inspection Institute, Harbin City Product Quality Supervision and Inspection Institute, Shaoxing County Shengmao Zhenfang Co., Ltd.

Division, Zhejiang Shangyu Feilong Silk Dyeing & Finishing Co., Ltd.

1 Scope

This standard specifies the classification, requirements, test methods, inspection rules and packaging, marking and transportation of jute printing cloth.

This standard applies to the identification of woven bleach, dyeing and printing jute quality.

2 Normative reference documents

The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article Pieces. For undated references, the latest edition (including all modifications) applies to this document.

GB/T 250 Textiles - Tests for color fastness - Assessment of discoloration with gray cards GB/T 3917.1 Textiles - Tearing properties of fabrics - Part 1. Determination of tear strength of impact pendulum GB/T 3920 Textiles - Tests for color fastness - Color fastness to rubbing Textiles - Tests for color fastness - Color fastness to soaping GB/T 3921-2008 GB/T 3922 Textiles - Tests for color fastness - Color fastness to perspiration GB/T 3923.1 Tensile properties of textile fabrics - Part 1. Determination of breaking strength and elongation at break (strip method) GB/T 4666 Textiles - Determination of length and width of fabrics GB/T 4668 Determination of woven fabric density Specification for the use of consumer products - Part 4. Textiles and clothing Textiles - Tests for color fastness - Color fastness to water Textiles - Tests for color fastness - Color fastness to heat press GB/T 6152-1997 Representation and Judgment of Numerical Correction Rule and Limit Value of GB/T 8170 GB/T 8427 Textiles - Tests for color fastness - Color fastness to artificial light. Xenon arc GB/T 8628 Preparation, marking and measurement of fabric samples and garments for testing of dimensional changes in textiles Household washing and drying procedures for textile testing GB/T 8629-2001 GB/T 8630 Textiles - Determination of dimensional change after washing and drying GB/T 13772.2 Determination of slippage resistance of yarns for textile woven fabrics - Part 2. Fixed load method Test method for weft and bow - weft test of woven and knitted fabrics GB/T 14801 Technical specification for basic safety of national textile products GB 18401 GB/T 21196.2 Textiles - Determination of abrasion resistance of Martindale fabrics - Part 2. Determination of breakage of specimens

3 Classification

Jute printing and dyeing cloth by variety, finished product classification, various types of products and finished product specifications according to user needs can refer to the standard attached Record A developed.

4 Requirements