EJ/T 20150.21-2018Post-irradiation inspection of pressurized water reactor bundle beam assemblies - Part 21: Internal pressure burst test for fuel cladding tubes (English PDF)
压水堆棒束型燃料组件辐照后检查 第21部分:燃料包壳管内压爆破试验
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for EJ/T 20150.21-2018 in 30 minutes.
Issued by
State Administration of Science, Technology and Industry for National Defense
Level / Type
National · Recommended
Issue date
January 18, 2018
Implementation date
May 1, 2018
Scope
EJ/T 20150.21-2018 is the English-translated version of 压水堆棒束型燃料组件辐照后检查 第21部分:燃料包壳管内压爆破试验.
EJ/T 20150.21-2018 is the Chinese standard "Post-irradiation inspection of pressurized water reactor bundle beam assemblies - Part 21: Internal pressure burst test for fuel cladding tubes".
It was issued by State Administration of Science, Technology and Industry for National Defense. Issued on 2018-01-18, in force from 2018-05-01.
Found what you need?
Document preview — EJ/T 20150.21-2018
National Standard of the People's Republic of China
Issued by: State Administration of Science, Technology and Industry for National Defense
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 2.1 Equipment
- 2.2 Materials
- 3 Terms and definitions
- 3.1 Sampling
- 3.2 Mounting
- 3.3 Grinding
- 3.4 Mechanical Polishing
- 3.5 Etching
- 4 Inspection Methods
- 4.1 Stainless Steel and Nickel-based Alloy Weld Samples
- 4.2 Design Document Preparation
- 4.3 Determination of Survey Area
- 4.4 Determination of Baselines, Survey Lines, and Survey Grids
- 4.5 Method Selection and Measurement Point Layout
- 5 Records and Reports
- 5.1 Records
- 5.2 Field Reconnaissance
- 6 Structural Materials
- 7 Equipment Selection
- 8 Safety Considerations
- 9 Other Requirements
1 Foreword
EJ/T 20150.21-2018 was issued by State Administration of Science, Technology and Industry for National Defense on 18 January 2018 and has been in force since 1 May 2018.
It is one of 10 parts of the EJ/T 20150 series.
The EJ/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
EJ/T 20150.21-2018 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 313 other EJ/T standards.
In this catalogue, EJ/T standards carry edition years from 1992 to 2018.
3 About this standard
Sector: Nuclear Industry Standard (Recommended)
Issued by: State Administration of Science, Technology and Industry for National Defense
English translation: about 15 pages (approximate)
4 Related standards
Other parts of this standard:
EJ/T 20150.1-2018 — Post-irradiation inspection of pressurized water reactor bundle beam fuel assemblies - Part 1: General
EJ/T 20150.7-2018 — Part 7: Examination of the appearance of fuel rods
EJ/T 20150.10-2018 — Post-irradiation inspection of pressurized water reactor bundle beam fuel assemblies - Part 10: Fuel rod leakage detection bubble method
EJ/T 20150.13-2018 — Part 13: X-ray inspection of fuel rods
EJ/T 20150.16-2018 — Post-irradiation inspection of pressurized water reactor bundles - Part 16: Fuel rod internal pressure measurement
EJ/T 20150.17-2018 — Post-irradiation inspection of pressurized water reactors - Part 17: Analysis of hydrazine and hydraz
EJ/T 20150.19-2018 — Post-irradiation inspection of pressurized water reactor bundles - Part 19: Tensile test for fuel cladding tubes
EJ/T 20150.25-2018 — Part 25: Metallographic examination of fuel rods
EJ/T 20150.29-2018 — Part 29: Hydrogen content measurement of fuel cladding tubes
Standards on related subjects:
JB 2293-1978 — Wind tunnel test method of radiator of automobile and tractor
5 Classification and status
Prefix EJ/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
How to Download EJ/T 20150.21-2018
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
EJ/T 20150.23-2018 — Post-photographic inspection of PWR rod beam type fuel assemblies-Part 23: Scanning electron microscope analysis of fuel cladding tubes
EJ/T 20150.19-2018 — Post-irradiation inspection of pressurized water reactor bundles - Part 19: Tensile test for fuel cladding tubes
EJ/T 20150.25-2018 — Post-irradiation inspection of pressurized water reactor bundle beam assemblies - Part 25: Metallographic examination of fuel rods
EJ/T 20150.21-2018
$105.00