EJ/T 20149.2-2018Guidelines for the design of hot cell equipment-Part 2: Mechanical drive systems for remote operation (English PDF)
热室设备设计导则 第2部分:远程操作用机械驱动系统
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for EJ/T 20149.2-2018 in 30 minutes.
Issued by
State Administration of Science, Technology and Industry for National Defense
Level / Type
National · Recommended
Issue date
December 28, 2018
Implementation date
March 1, 2019
Scope
EJ/T 20149.2-2018 is the English-translated version of 热室设备设计导则 第2部分:远程操作用机械驱动系统.
EJ/T 20149.2-2018 is the Chinese standard "Guidelines for the design of hot cell equipment-Part 2: Mechanical drive systems for remote operation". It was issued by State Administration of Science, Technology and Industry for National Defense. Issued on 12/28/2018, in force from 3/1/2019.
Found what you need?
Document preview — EJ/T 20149.2-2018
National Standard of the People's Republic of China
Issued by: State Administration of Science, Technology and Industry for National Defense
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 2.1 Equipment
- 2.2 Materials
- 3 Terms
- 3.1 Sampling
- 3.2 Mounting
- 3.3 Grinding
- 3.4 Mechanical Polishing
- 3.5 Etching
- 4 Quality Assurance Requirements
- 5 General Requirements
- 6 Structural Materials
- 7 Equipment Selection
- 8 Safety Considerations
- 9 Other Requirements
1 Foreword
EJ/T 20149.2-2018 was issued by State Administration of Science, Technology and Industry for National Defense on 28 December 2018 and has been in force since 1 March 2019.
It is one of 2 parts of the EJ/T 20149 series.
This is a draft translation for reference among interesting stakeholders. The finalized translation (passing through draft translation, self-check, revision and verification) will be delivered upon being ordered.
2 Scope Preview
This part specifies guiding principles for the design, selection, quality assurance, installation, operation, and maintenance of mechanically driven systems used in remote operation hot cell environments. The mechanically driven systems referred to in this part include individual components that transmit driving force to hot cell equipment systems, subsystems, assemblies, and other components, as well as complete positioning units and systems that provide position indicators required for driving force and motion monitoring. Specific types include, but are not limited to: drive motors; torque transmission components (such as gears, shafts, couplings, transmission belts, transmission chains, torque limiters, slip clutches, brakes); linear positioning systems (such as lead screws, screw jacks, pneumatic cylinders, hydraulic cylinders, electric actuators); position indicators (such as resolvers, encoders, linear variable differential transformers, limit switches). This part applies to mechanically driven systems operating under one or more of the following conditions: materials handled or processed pose a significant radiation hazard to personnel or the environment; the equipment service life typically exceeds two years, although equipment with a shorter service life is not excluded; equipment cannot be operated or maintained directly and can only be observed through radiation shielding windows or video observation systems.
EJ/T 20149.2-2018 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 313 other EJ/T standards.
In this catalogue, EJ/T standards carry edition years from 1992 to 2018.
3 About this standard
Sector: Nuclear Industry Standard (Recommended)
Issued by: State Administration of Science, Technology and Industry for National Defense
English translation: about 15 pages (approximate)
4 Related standards
Other parts of this standard:
EJ/T 20149.1-2018 — Thermal equipment design guides - Part 1: General design guidelines
Standards on related subjects:
JB 2293-1978 — Wind tunnel test method of radiator of automobile and tractor
5 Classification and status
Prefix EJ/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
How to Download EJ/T 20149.2-2018
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
EJ/T 20149.1-2018 — Thermal equipment design guides - Part 1: General design guidelines
EJ/T 1007-2018 — Technical regulations for environmental protection of in-situ leaching uranium
EJ/T 1009-2018 — Calculation of water inflow from mine pits in uranium mines
EJ/T 20149.2-2018
$285.00