Valid

DL/T 1498.2-2016Technical specification for on-line monitoring device of transformation equipment - Part 2: on-line monitoring device of gases dissolved in transformer oil (English PDF)

Preview PDF

Also coversDLT1498.2-2016

This is a limited preview

Buy now to download the full PDF (5 pages)

Need quotation for your management?

Get a formal quotation for DL/T 1498.2-2016 in 30 minutes.

Issued by

National Energy Administration

Level / Type

National · Recommended

Issue date

January 7, 2016

Implementation date

June 1, 2016

Scope

DL/T 1498.2-2016 (Technical specification for on-line monitoring device of transformation equipment - Part 2: on-line monitoring device of gases dissolved in transformer oil) is available as an English-translated PDF.

DL/T 1498.2-2016 — This part specifies the terms and definitions, composition, classification, technical requirements, test items and requirements, inspection rules and marking, packaging, transportation and storage of the on-line monitoring device of gases dissolved in transformer oil.

This part is applicable to the design, production, type selection, operation and maintenance of the on-line monitoring device of gases dissolved in transformer oil.

Found what you need?

Document preview — DL/T 1498.2-2016

National Standard of the People's Republic of China

ICS
29.040.10
Classification
E 38

Issued by: National Energy Administration

Contents

  • Foreword...4
  • 1 Scope...5
  • 2 Normative references...5
  • 3 Terms and definitions...5

Foreword

DL/T 1498 "Technical specification for on-line monitoring device of

transformation equipment" is divided into five parts.

- Part 1. General;

- Part 2. Online monitoring device for dissolved gases in transformer oil;

- Part 3. On-line insulation monitoring device of capacitive equipment and

metal oxide arrester;

- Part 4. On-line monitoring device for gas-insulated metal-enclosed

switchgear very high frequency local discharge;

- Part 5. On-line monitoring device for transformer iron core grounding

current.

This part is part 2.

This part was proposed by the China Electricity Council.

This part shall be under the jurisdiction of the National Electric Power

Equipment State Maintenance and Online Monitoring Standardization

Technical Committee.

The responsible drafting organizations of this part. China Electric Power

Research Institute.

The main participating drafting organizations of this part. State Grid Anhui

Electric Power Company, State Grid Hebei Electric Power Company,

Guangdong Power Grid Company Limited Electric Power Research Institute,

Ningbo Science and Technology Monitoring Technology Co., Ltd., Henan

Zhongfen Instrument Co., Ltd., Siyuan Electric Co., Ltd.

1 Scope

This part specifies the terms and definitions, composition, classification,

technical requirements, test items and requirements, inspection rules and

marking, packaging, transportation and storage of the on-line monitoring

device of gases dissolved in transformer oil.

This part is applicable to the design, production, type selection, operation and

maintenance of the on-line monitoring device of gases dissolved in transformer

oil.

2 Normative references

The following documents are essential to the application of this document. For

the dated documents, only the versions with the dates indicated are applicable

to this document; for the undated documents, only the latest version (including

all the amendments) are applicable to this Standard.

GB/T 191 Packaging - Pictorial marking for handling of goods

GB/T 17623 Determination of component contents of gases dissolved in

insulating oil by gas chromatography method

DL/T 722-2014 Guide to the analysis and the diagnosis of gases dissolved

in transformer oil

DL/T 1498.1-2016 Technical specification for on-line monitoring device of

transformation equipment - Part 1. General

DL/T 1432.2 Testing specification for on-line monitoring device of

transformation equipment - Part 2. Online monitoring device for dissolved

gas in transformer oil

3 Terms and definitions

The following terms and definitions apply to this document.

3.1

On-line monitoring device of gases dissolved in transformer oil

dissolved in transformer oil

4.1 Oil sample collection and gas-oil separation part

The oil sample collection part is connected with the oil tank valve of the

monitored equipment to complete the sampling of the transformer oil. AND the

gas-oil separation part realizes the separation of the gases dissolved in oil

from the transformer oil.

4.2 Gas detection part

Gas detection part is used for the detection of the mixed gas components after

gas-oil separation.

4.3 Data collection and control part

It is used to complete the signal collection and data processing, AND to realize

the automatic control of the analysis process.

4.4 Communication part

The communication part is used to realize the communication between other

equipment and this device, AND it shall use the standard communication

interface and protocol which comply with the monitoring data and control

command transmission requirements.

4.5 Auxiliary part

The auxiliary part refers to other relevant parts which are used to ensure that

the device is working properly, such as temperature control, gas cylinders,

piping and so on.

5 Classification of on-line monitoring device of gases

dissolved in transformer oil

5.1 Multi-component on-line monitoring device

It refers to the monitoring device which monitors at least 6 components of

gases dissolved in transformer oil, which is used for defect or fault alarming

and fault type diagnosis. The monitoring items include hydrogen (H2), methane

(CH4), ethane (C2H6), ethylene (C2H4), acetylene (C2H2), and carbon monoxide

(CO). The commonly used device is the monitoring device of 7 characteristic

gases including carbon dioxide (CO2). AND the oxygen (O2) and nitrogen (N2)

are optional monitoring items.

6.4 Sampling piping requirements

The oil piping shall be made of stainless steel or copper and other materials.

Outside the oil piping, it may be added with piping tracing heat belt,...

......

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 5 pages — is available in the English PDF.

Referenced standards

How to Download DL/T 1498.2-2016

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
5 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

DL/T 1498.2-2016

$65.00