Valid

DL/T 1151.5-2012Analytical methods of scale and corrosion products in power plants. Part 5: Determination of iron oxide (English PDF)

火力发电厂垢和腐蚀产物分析方法第5部分：三氧化二铁的测定

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for DL/T 1151.5-2012 in 30 minutes.

Issued by

National Energy Administration

Level / Type

National · Recommended

Issue date

January 1, 2012

Implementation date

January 1, 2012

Scope

DL/T 1151.5-2012 is the English-translated version of 火力发电厂垢和腐蚀产物分析方法第5部分：三氧化二铁的测定.

DL/T 1151.5-2012 is the Chinese standard "Analytical methods of scale and corrosion products in power plants. Part 5: Determination of iron oxide".

Found what you need?

Document preview — DL/T 1151.5-2012

National Standard of the People's Republic of China

ICS: 27.100

[Preview only]
1 Scope
2 Normative references
2.1 Terms
3 Terms and definitions
4 General provisions
5 Apparatus

1 Foreword

DL/T 1151.5-2012 is issued by National Energy Administration.

It is one of 24 parts of the DL/T 1151 series.

The DL/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

DL/T 1151.5-2012 falls under ICS 27.100, in the field of energy and heat transfer engineering.

This catalogue holds 1,145 other DL/T standards in that field.

In this catalogue, DL/T standards carry edition years from 1991 to 2026.

3 About this standard

Issued by: National Energy Administration

English translation: about 15 pages (approximate)

4 Related standards

Other parts of this standard:

DL/T 1151-2019 — Guidelines for the chemical inspection of the overall overhaul of thermal power plants

DL/T 1151.1-2012 — Guidelines for the chemical inspection of the overall overhaul of thermal power plants

DL/T 1151.2-2012 — Part 2: Sampling and dissolving method for scale and corrosion products

DL/T 1151.3-2012 — Part 3: Determination of moisture content

DL/T 1151.4-2012 — Part 4: Determination of the loss (increase) on ignition

DL/T 1151.6-2012 — Part 6: Determination of aluminum oxide

DL/T 1151.7-2012 — Part 7: Determination of copper. Spectrometric method

DL/T 1151.8-2012 — Part 8: Determination of copper. Iodimetry

DL/T 1151.9-2012 — Part 9: Determination of calcium and magnesium oxide

DL/T 1151.10-2012 — Part 10: Determination of silica (silica dioxide)

DL/T 1151.11-2012 — Part 11: Determination of zinc oxide content

DL/T 1151.12-2012 — Part 12: Determination of phosphoric anhydride

DL/T 1151.13-2012 — Fart 13: Determination of sulfuric acid anhydride. Photometric method used to barium sulfate

DL/T 1151.14-2012 — Part 14: Determination of sulfuric anhydride. Photometric method using barium chromate

DL/T 1151.15-2012 — Part 15: Preparation of water-soluble scaling preparative test solution

DL/T 1151.16-2012 — Part 16: Test of alkali, carbonate, bicarbonate in water-soluble scaling

DL/T 1151.17-2012 — Part 17: Determination of chloride in deporsit-forming impuritied in steam

DL/T 1151.18-2012 — Part 18: Determination of sodium oxide in deposit-forming impuried in steam

DL/T 1151.19-2012 — Part 19: Determination of other components in deporsit-forming impuritied in steam

DL/T 1151.20-2012 — Part 20: Determination of carbon dioxide in carbonate scale

DL/T 1151.21-2012 — Part 21: Determiuation of metal-element contents. Inductively coupled plasma atomic emission spectroscopy (ICP-AES)

DL/T 1151.22-2012 — Part 22: Standard test methods of X-ray fluorescence spectrometry and X-ray diffraction

DL/T 1151.22-2023 — Methods for analysis of scale and corrosion products in thermal power plants - Part 22: Wavelength-dispersive X-ray fluorescence spectrometry and X-ray diffraction

5 Classification and status

International classification (ICS): 27.100

Prefix DL/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

How to Download DL/T 1151.5-2012

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.