Valid

CJJ/T 285-2018Technical Standard of integrated prefabricated pumping station engineering (English PDF)

一体化预制泵站工程技术标准

Preview PDF

This is a limited preview

Buy now to download the full PDF (36 pages)

Need quotation for your management?

Get a formal quotation for CJJ/T 285-2018 in 30 minutes.

Issued by

Ministry of Housing and Urban-Rural Development of the People's Republic of China

Level / Type

National · Recommended

Issue date

December 6, 2018

Implementation date

June 1, 2019

Scope

CJJ/T 285-2018 is the English-translated version of 一体化预制泵站工程技术标准.

CJJ/T 285-2018 — This standard is applicable to the design, construction, acceptance, operation and maintenance of integrated prefabricated pumping station projects in urban water supply and drainage projects for new construction, expansion and reconstruction.

Found what you need?

Document preview — CJJ/T 285-2018

National Standard of the People's Republic of China

ICS
91.140.60
Classification
P 41

Issued by: Ministry of Housing and Urban-Rural Development of the People's Republic of China

Contents

  • 1 General provisions 1
  • 2 Terms and symbols 2
  • 2.1 Terms 2
  • 2.1.1 Integrated prefabricated pumping station
  • 2.1.2 Wet well integrated prefabricated pumping station
  • 2.1.3 Dry well integrated prefabricated pumping station
  • 2.1.4 Basket screen
  • 2.1.5 Grinder
  • 2.2 Symbols 2
  • 3 Basic requirements 3
  • 4 Engineering design 4
  • 4.1 General requirements 4
  • 4.2 Site selection and general layout 5
  • 4.3 Process design 6
  • 4.4 Structural design 11
  • 4.5 Electrical and control instruments 13
  • 4.6 Design of auxiliary facilities 16
  • 5 Construction and acceptance 18
  • 5.1 Construction 18
  • 5.2 Acceptance 21
  • 6 Operation and maintenance 23
  • 6.1 Operation 23
  • 6.2 Maintenance 25

1 Foreword

CJJ/T 285-2018 was issued by Ministry of Housing and Urban-Rural Development of the People's Republic of China on 6 December 2018 and has been in force since 1 June 2019.

According to the requirements of Document JIANBIAO [2014] No.189 issued by the Ministry of Housing and Urban-Rural Development of the People's Republic of China - Notice on printing and distributing the development and revision plan on engineering construction standards and codes in 2015, the drafting group of standard complied this standard through the extensive investigation and study, careful summarization of practical experience and reference to relevant international and foreign advanced standards and on the basis of widely soliciting for opinions.

The main technical contents of this standard are: 1. General provisions; 2. Terms and symbols; 3. Basic requirements; 4. Engineering design; 5. Construction and acceptance; 6. Operation and maintenance.

The Ministry of Housing and Urban-Rural Development of the People's Republic of China is in charge of the administration of this standard, and Shanghai Municipal Engineering Design Institute (Group) Co., Ltd. is responsible for the explanation of specific technical contents. During the process of implementing this standard, you are kindly requested to send your opinions and advice (if any) to Shanghai Municipal Engineering Design Institute (Group) Co., Ltd. (Address: No.901, North Zhongshan No.2 Road, Zhongshan District, Shanghai, 200092, China).

2 Scope Preview

This standard is applicable to the design, construction, acceptance, operation and maintenance of integrated prefabricated pumping station projects in urban water supply and drainage projects for new construction, expansion and reconstruction.

CJJ/T 285-2018 falls under ICS 91.140.60, in the field of construction materials and building.

This catalogue holds 59 other CJJ/T standards in that field.

In this catalogue, CJJ/T standards carry edition years from 1993 to 2023.

3 About this standard

Issued by: Ministry of Housing and Urban-Rural Development of the People's Republic of China

English translation: about 36 pages

Chinese original: about 54,590 characters

4 Related standards

Standards on related subjects:

GB/T 18916.3-2022 — Norm of water intake—Part 3: Petroleum refining

GB/T 18916.31-2017 — Norm of water intake - Part 31 :Sintering and pelletizing for iron and steel industry

CJ/T 225-2011 — Metal reinforced polyethylene (PE) spirally corrugated pipe for underground sewer

CJJ/T 282-2019 — Chinese standard

CJ/T 294-2018 — Rotating disc aerator

5 Classification and status

International classification (ICS): 91.140.60

Chinese Standard Classification (CCS): P 41

Prefix CJJ/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 36 pages — is available in the English PDF.

How to Download CJJ/T 285-2018

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
36 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

CJJ/T 285-2018

$275.00