Valid

CJJ/T 155-2011Technical specification for composite pipeline engineering of building water supply (English PDF)

建筑给水复合管道工程技术规程

Preview PDF

This is a limited preview

Buy now to download the full PDF (49 pages)

Need quotation for your management?

Get a formal quotation for CJJ/T 155-2011 in 30 minutes.

Issued by

Ministry of Housing and Urban-Rural Development of the People's Republic of China

Level / Type

National · Recommended

Issue date

February 11, 2011

Implementation date

December 1, 2011

Scope

CJJ/T 155-2011 is the English-translated version of 建筑给水复合管道工程技术规程.

CJJ/T 155-2011 — This standard applies to new construction, expansion and renovation of residential and industrial building water supply composite pipe engineering design, construction and quality acceptance.

Found what you need?

Document preview — CJJ/T 155-2011

National Standard of the People's Republic of China

ICS
91.140.60
Classification
P 42

Issued by: Ministry of Housing and Urban-Rural Development of the People's Republic of China

Contents

  • [Preview only]
  • 1 General provisions
  • 2 Terms
  • 2.1 Terms 2
  • 2.2 Symbols 2
  • 3 Arrangement and installation of pipes
  • 3.1 Arrangement of pipes
  • 3.2 Installation method
  • 3.3 Material of pipes
  • 4 Accessories of pipelines
  • 4.1 Accessories and facilities of pipelines
  • 4.2 Connecting of pipe fittings and pipes
  • 4.3 Layout of Gas Odorization Unit
  • 4.4 Structural design 11
  • 4.5 Electrical and control instruments 13
  • 4.6 Design of auxiliary facilities 16
  • 5 Calculation of pipe strength and stress
  • 5.1 Working pipe
  • 5.2 Outer protective pipe
  • 5.3 Inspection and Acceptance
  • 6 Insulation construction and insulating layer
  • 6.1 General requirements
  • 6.2 Insulation construction
  • 6.3 Vacuum insulating layer
  • 6.4 Insulation calculation
  • 7 Outer protective pipe and anticorrosion
  • 7.2 Stiffness and stability of outer protective pipe
  • 7.3 Anticorrosion of outer protective pipe
  • 8 Construction and acceptance
  • 8.2 Pipe installation
  • 8.3 Heat preservation pipe patch
  • 8.4 Vacuum system installation
  • 8.5 Pressure test, purging and trial operation
  • 9 Operation management
  • 9.2 Preparation before operation
  • 9.3 Warming pipe
  • 9.4 Operational maintenance
  • 9.5 Operational stop

1 Foreword

CJJ/T 155-2011 was issued by Ministry of Housing and Urban-Rural Development of the People's Republic of China on 11 February 2011 and has been in force since 1 December 2011.

The CJJ/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 49 pages in English translation.

2 Scope Preview

This standard applies to new construction, expansion and renovation of residential and industrial building water supply composite pipe engineering design, construction and quality acceptance.

CJJ/T 155-2011 falls under ICS 91.140.60, in the field of construction materials and building.

This catalogue holds 59 other CJJ/T standards in that field.

In this catalogue, CJJ/T standards carry edition years from 1993 to 2023.

3 About this standard

Issued by: Ministry of Housing and Urban-Rural Development of the People's Republic of China

English translation: about 49 pages

Chinese original: about 74,755 characters

4 Related standards

Standards on related subjects:

GB/T 41494-2022 — Aluminum alloy lining plastics pipes and fittings

CJ/T 244-2016 — Water quality standards for swimming pool

CJ/T 217-2013 — Compound quick air inbreathe-release valve for water supply pipeline

CJJ/T 154-2020 — Technical standards for building water supply metal pipeline engineering (with clause description)

CJ/T 151-2016 — Light gauge stainless steel tubes

CJ/T 152-2016 — Light gauge stainless steel press-fittings and grooving fittings

5 Classification and status

International classification (ICS): 91.140.60

Chinese Standard Classification (CCS): P 42

Prefix CJJ/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 49 pages — is available in the English PDF.

How to Download CJJ/T 155-2011

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
49 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

CJJ/T 155-2011

$710.00