Valid

CJJ 266-2017Code for construction and quality acceptance of ladder-sleeper track of urban rail transit (English PDF)

城市轨道交通梯形轨枕轨道工程施工及质量验收规范

Preview PDF

This is a limited preview

Buy now to download the full PDF (43 pages)

Need quotation for your management?

Get a formal quotation for CJJ 266-2017 in 30 minutes.

Issued by

Ministry of Housing and Urban-Rural Development of the People's Republic of China

Level / Type

National · Mandatory

Issue date

January 20, 2017

Implementation date

July 1, 2017

Scope

CJJ 266-2017 is the English-translated version of 城市轨道交通梯形轨枕轨道工程施工及质量验收规范.

CJJ 266-2017 — This standard is applicable to the construction and acceptance of trapezoidal sleeper track project of new urban rail transit.

Found what you need?

Document preview — CJJ 266-2017

National Standard of the People's Republic of China

ICS
45.080
Classification
P 65

Issued by: Ministry of Housing and Urban-Rural Development of the People's Republic of China

Contents

  • [Preview only]
  • 1 General provisions
  • 2 Terms and symbols
  • 2.1 Terms
  • 2.2 Symbols
  • 2.3 Service for operation and maintenance
  • 2.4 Economic and environmental protection operation indexes
  • 2.5 Spare parts
  • 3 Basic Requirements
  • 3.1 General requirements
  • 3.2 Quality requirements
  • 3.3 Design calculation parameters
  • 3.4 Transportation and storage
  • 3.5 Seismic Conceptual Design
  • 3.6 Fault handling
  • 3.7 Maintenance and overhaul
  • 4 Design
  • 4.2 Pipeline layout and laying
  • 4.3 Pipeline hydraulic calculation
  • 4.4 Pipeline structural design
  • 4.5 Pipeline appurtenances and buttresses
  • 4.6 Serviceability Limit State Calculation
  • 4.7 Pipe Connection
  • 4.8 Subgrade Treatment
  • 4.9 Backfill Design
  • 5 Construction
  • 5.2 Trench excavation and soil treatment
  • 5.3 Pipeline connection
  • 5.4 Pipeline laying
  • 5.5 Trench backfill
  • 5.6 Pipeline appurtenances and auxiliaries installation
  • 5.7 Connection of branch pipe/service pipe to existing pipeline
  • 6 Water pressure test, flushing and disinfection
  • 6.2 Water pressure test
  • 6.3 Flushing and disinfection
  • 6.4 Time History Analysis Method
  • 6.5 Seismic Analysis for Regular Bridges
  • 6.6 Calculation for Capacity Protected Member
  • 6.7 Bridge Abutment
  • 7 Construction completion and final acceptance
  • 7.2 Seismic Check for E1 Earthquake
  • 7.3 Seismic Check for E2 Earthquake
  • 7.4 Seismic Check for Capacity Protected Members
  • 7.5 Structural calculation of inspection well
  • 7.6 Dispatching
  • 8 Grade Separation Junction, Viaduct and Underpass
  • 8.2 Grade Separation Junction and Viaduct
  • 8.3 Underpass
  • 8.4 Structural calculation of tunnel
  • 9 Bridge Detail Structures and Attachments
  • 9.2 Drainage and Waterproofing Design of Bridge Deck and Underpass
  • 9.3 Bridge Expansion Joints
  • 9.4 Bridge Bearing
  • 9.5 Bridge Railing
  • 9.6 Lighting, Energy Saving and Environmental Protection
  • 9.7 Other Attachments

1 Foreword

CJJ 266-2017 was issued by Ministry of Housing and Urban-Rural Development of the People's Republic of China on 20 January 2017 and has been in force since 1 July 2017.

The CJJ prefix, without a suffix, marks a mandatory standard: within its scope, compliance is required.

The document runs to 43 pages in English translation.

2 Scope Preview

This standard is applicable to the construction and acceptance of trapezoidal sleeper track project of new urban rail transit.

CJJ 266-2017 falls under ICS 45.080, in the field of railway engineering.

This catalogue holds 1 other CJJ standards in that field.

In this catalogue, CJJ standards carry edition years from 1985 to 2018.

3 About this standard

Issued by: Ministry of Housing and Urban-Rural Development of the People's Republic of China

English translation: about 43 pages

Chinese original: about 65,624 characters

4 Related standards

Standards on related subjects:

TB 10025-2019 — Code for design of retaining structures of railway earthworks

CJJ/T 262-2017 — Code for design of medium and low speed maglev transit

CJJ/T 256-2016 — Technical specification for medium and low speed maglev traffic power supply

5 Classification and status

International classification (ICS): 45.080

Chinese Standard Classification (CCS): P 65

Prefix CJJ: mandatory standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 43 pages — is available in the English PDF.

How to Download CJJ 266-2017

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
43 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

CJJ 266-2017

$385.00