Valid

CJJ 224-2014Urban water supply pipeline engineering technical specification concrete prestressed steel tube (English PDF)

城镇给水预应力钢筒混凝土管管道工程技术规程

Preview PDF

This is a limited preview

Buy now to download the full PDF (67 pages)

Need quotation for your management?

Get a formal quotation for CJJ 224-2014 in 30 minutes.

Issued by

Ministry of Housing and Urban-Rural Development of the People's Republic of China

Level / Type

National · Mandatory

Issue date

November 5, 2014

Implementation date

June 1, 2015

Scope

CJJ 224-2014 is the English-translated version of 城镇给水预应力钢筒混凝土管管道工程技术规程.

CJJ 224-2014 — This standard applies to new construction, expansion and renovation of the urban water supply and prestressed concrete cylinder pipeline engineering design, construction and acceptance.

Found what you need?

Document preview — CJJ 224-2014

National Standard of the People's Republic of China

Classification
P 41

Issued by: Ministry of Housing and Urban-Rural Development of the People's Republic of China

Contents

  • [Preview only]
  • 1 General provisions
  • 2 Terms and symbols
  • 2.1 Terms
  • 2.2 Symbols
  • 2.3 Service for operation and maintenance
  • 2.4 Economic and environmental protection operation indexes
  • 2.5 Spare parts
  • 3 Basic Requirements
  • 3.1 General requirements
  • 3.2 Quality requirements
  • 3.3 Design calculation parameters
  • 3.4 Transportation and storage
  • 3.5 Seismic Conceptual Design
  • 3.6 Fault handling
  • 3.7 Maintenance and overhaul
  • 4 Design
  • 4.2 Pipeline layout and laying
  • 4.3 Pipeline hydraulic calculation
  • 4.4 Pipeline structural design
  • 4.5 Pipeline appurtenances and buttresses
  • 4.6 Serviceability Limit State Calculation
  • 4.7 Pipe Connection
  • 4.8 Subgrade Treatment
  • 4.9 Backfill Design
  • 5 Construction
  • 5.2 Trench excavation and soil treatment
  • 5.3 Pipeline connection
  • 5.4 Pipeline laying
  • 5.5 Trench backfill
  • 5.6 Pipeline appurtenances and auxiliaries installation
  • 5.7 Connection of branch pipe/service pipe to existing pipeline
  • 6 Water pressure test, flushing and disinfection
  • 6.2 Water pressure test
  • 6.3 Flushing and disinfection
  • 6.4 Time History Analysis Method
  • 6.5 Seismic Analysis for Regular Bridges
  • 6.6 Calculation for Capacity Protected Member
  • 6.7 Bridge Abutment
  • 7 Construction completion and final acceptance
  • 7.2 Seismic Check for E1 Earthquake
  • 7.3 Seismic Check for E2 Earthquake
  • 7.4 Seismic Check for Capacity Protected Members
  • 7.5 Structural calculation of inspection well
  • 7.6 Dispatching
  • 8 Grade Separation Junction, Viaduct and Underpass
  • 8.2 Grade Separation Junction and Viaduct
  • 8.3 Underpass
  • 8.4 Structural calculation of tunnel
  • 9 Bridge Detail Structures and Attachments
  • 9.2 Drainage and Waterproofing Design of Bridge Deck and Underpass
  • 9.3 Bridge Expansion Joints
  • 9.4 Bridge Bearing
  • 9.5 Bridge Railing
  • 9.6 Lighting, Energy Saving and Environmental Protection
  • 9.7 Other Attachments

1 Foreword

CJJ 224-2014 was issued by Ministry of Housing and Urban-Rural Development of the People's Republic of China on 5 November 2014 and has been in force since 1 June 2015.

The CJJ prefix, without a suffix, marks a mandatory standard: within its scope, compliance is required.

The document runs to 67 pages in English translation.

2 Scope Preview

This standard applies to new construction, expansion and renovation of the urban water supply and prestressed concrete cylinder pipeline engineering design, construction and acceptance.

CJJ 224-2014 is filed under Chinese Standard Classification P 41, in the field of engineering construction.

This catalogue holds 65 other CJJ standards without an ICS number.

In this catalogue, CJJ standards carry edition years from 1985 to 2018.

3 About this standard

Issued by: Ministry of Housing and Urban-Rural Development of the People's Republic of China

English translation: about 67 pages

Chinese original: about 102,184 characters

4 Related standards

Standards on related subjects:

GB/T 18916.3-2022 — Norm of water intake—Part 3: Petroleum refining

GB/T 18916.31-2017 — Norm of water intake - Part 31 :Sintering and pelletizing for iron and steel industry

CJ/T 233-2016 — Building area drainage plastic inspection wells

CJJ/T 229-2015 — Technical specification for micro-polluted water pretreatment of municipal water supply

5 Classification and status

Chinese Standard Classification (CCS): P 41

Prefix CJJ: mandatory standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 67 pages — is available in the English PDF.

How to Download CJJ 224-2014

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
67 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

CJJ 224-2014

$2,102.00