Valid

CJJ 166-2011Code for seismic design of urban bridges (English PDF)

城市桥梁抗震设计规范

Preview PDF

This is a limited preview

Buy now to download the full PDF (87 pages)

Need quotation for your management?

Get a formal quotation for CJJ 166-2011 in 30 minutes.

Issued by

Ministry of Housing and Urban-Rural Development of the People's Republic of China

Level / Type

National · Mandatory

Issue date

July 13, 2011

Implementation date

March 1, 2012

Scope

CJJ 166-2011 is the English-translated version of 城市桥梁抗震设计规范.

CJJ 166-2011 — This standard applies to the basic seismic intensity 6, 7, 8 and 9 degrees areas of the city bridges bridges and span no more than 150m arch.

Found what you need?

Document preview — CJJ 166-2011

National Standard of the People's Republic of China

ICS
93.040
Classification
P 28

Issued by: Ministry of Housing and Urban-Rural Development of the People's Republic of China

Contents

  • 1 General Provisions
  • 2 Terms and Symbols
  • 2.1 Terms
  • 2.1.1 Seismic ground motion parameter zoning
  • 2.1.2 Seismic fortification criterion
  • 2.1.3 Earthquake action
  • 2.1.4 Earthquake action E1
  • 2.1.5 Earthquake action E2
  • 2.1.6 Seismic effect
  • 2.2 Symbols
  • 3 Basic Requirements
  • 3.1 Seismic Classification and Fortification Criterion
  • 3.2 Earthquake Effect
  • 3.3 Classification of Seismic Design Methods
  • 3.4 Bridge Earthquake Resisting System
  • 3.5 Seismic Conceptual Design
  • 4 Site, Soil and Foundation
  • 4.1 Site
  • 4.2 Liquefied Soil
  • 4.3 Capacity of Foundation
  • 4.4 Pile Foundation
  • 5 Earthquake Action
  • 5.1 General Requirements
  • 5.2 Design Acceleration Spectrum
  • 5.3 Design Ground Motion Time History
  • 5.4 Seismic Active Soil Pressure and Dynamic Hydraulic Pressure
  • 5.5 Combination of Actions
  • 6 Seismic Analysis
  • 6.1 General Requirements
  • 6.2 Principle of Modeling
  • 6.3 Response Spectrum Method
  • 6.4 Time History Analysis Method
  • 6.5 Seismic Analysis for Regular Bridges
  • 6.6 Calculation for Capacity Protected Member
  • 6.7 Bridge Abutment
  • 7 Seismic Check
  • 7.1 General Requirements
  • 7.2 Seismic Check for E1 Earthquake
  • 7.3 Seismic Check for E2 Earthquake
  • 7.4 Seismic Check for Capacity Protected Members
  • 8 Seismic Design Details
  • 8.1 Pier Column Detailing
  • 8.2 Joint Detailing
  • 9 Bridge Seismic Isolation Design
  • 9.1 General Requirements
  • 9.2 Seismic Isolation Devices
  • 9.3 Seismic Analysis for Isolated Bridges
  • 9.4 Seismic Check for Isolated Bridges

1 Foreword

CJJ 166-2011 was issued by Ministry of Housing and Urban-Rural Development of the People's Republic of China on 13 July 2011 and has been in force since 1 March 2012.

The CJJ prefix, without a suffix, marks a mandatory standard: within its scope, compliance is required.

The document runs to 87 pages in English translation.

2 Scope Preview

This standard applies to the basic seismic intensity 6, 7, 8 and 9 degrees areas of the city bridges bridges and span no more than 150m arch. Cable-stayed bridge, suspension bridge and arch span of this specification can be given in seismic design principles for the design.

CJJ 166-2011 falls under ICS 93.040, in the field of civil engineering.

This catalogue holds 11 other CJJ standards in that field.

In this catalogue, CJJ standards carry edition years from 1985 to 2018.

3 About this standard

Issued by: Ministry of Housing and Urban-Rural Development of the People's Republic of China

English translation: about 87 pages

Chinese original: about 131,141 characters

4 Related standards

Standards on related subjects:

TB 10091-2017 — Code for Design on Steel Structure of Railway Bridge

GB 50982-2014 — Technical code for monitoring of building and bridge structures

GB 50923-2013 — Technical code for concrete-filled steel tube arch bridges

CJJ/T 111-2023 — Technical standard for segmental precast concrete bridges

5 Classification and status

International classification (ICS): 93.040

Chinese Standard Classification (CCS): P 28

Prefix CJJ: mandatory standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 87 pages — is available in the English PDF.

How to Download CJJ 166-2011

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
87 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

CJJ 166-2011

$385.00