Valid

CJJ 161-2011Technical specification for egg-shaped digester of sewage treatment (English PDF)

污水处理卵形消化池工程技术规程

Preview PDF

This is a limited preview

Buy now to download the full PDF (48 pages)

Need quotation for your management?

Get a formal quotation for CJJ 161-2011 in 30 minutes.

Issued by

Ministry of Housing and Urban-Rural Development of the People's Republic of China

Level / Type

National · Mandatory

Issue date

March 15, 2011

Implementation date

January 1, 2012

Scope

CJJ 161-2011 is the English-translated version of 污水处理卵形消化池工程技术规程.

CJJ 161-2011 — This standard applies to post-tensioned oval digester wastewater treatment engineering design, construction and quality acceptance.

Found what you need?

Document preview — CJJ 161-2011

National Standard of the People's Republic of China

ICS
13.060.30
Classification
P 41

Issued by: Ministry of Housing and Urban-Rural Development of the People's Republic of China

Contents

  • [Preview only]
  • 1 General provisions
  • 2 Terms and symbols
  • 2.1 Terms
  • 2.2 Symbols
  • 2.3 Service for operation and maintenance
  • 2.4 Economic and environmental protection operation indexes
  • 2.5 Spare parts
  • 3 Basic Requirements
  • 3.1 General requirements
  • 3.2 Quality requirements
  • 3.3 Design calculation parameters
  • 3.4 Transportation and storage
  • 3.5 Seismic Conceptual Design
  • 3.6 Fault handling
  • 3.7 Maintenance and overhaul
  • 4 Design
  • 4.2 Pipeline layout and laying
  • 4.3 Pipeline hydraulic calculation
  • 4.4 Pipeline structural design
  • 4.5 Pipeline appurtenances and buttresses
  • 4.6 Serviceability Limit State Calculation
  • 4.7 Pipe Connection
  • 4.8 Subgrade Treatment
  • 4.9 Backfill Design
  • 5 Construction
  • 5.2 Trench excavation and soil treatment
  • 5.3 Pipeline connection
  • 5.4 Pipeline laying
  • 5.5 Trench backfill
  • 5.6 Pipeline appurtenances and auxiliaries installation
  • 5.7 Connection of branch pipe/service pipe to existing pipeline
  • 6 Water pressure test, flushing and disinfection
  • 6.2 Water pressure test
  • 6.3 Flushing and disinfection
  • 6.4 Time History Analysis Method
  • 6.5 Seismic Analysis for Regular Bridges
  • 6.6 Calculation for Capacity Protected Member
  • 6.7 Bridge Abutment
  • 7 Construction completion and final acceptance
  • 7.2 Seismic Check for E1 Earthquake
  • 7.3 Seismic Check for E2 Earthquake
  • 7.4 Seismic Check for Capacity Protected Members
  • 7.5 Structural calculation of inspection well
  • 7.6 Dispatching
  • 8 Grade Separation Junction, Viaduct and Underpass
  • 8.2 Grade Separation Junction and Viaduct
  • 8.3 Underpass
  • 8.4 Structural calculation of tunnel
  • 9 Bridge Detail Structures and Attachments
  • 9.2 Drainage and Waterproofing Design of Bridge Deck and Underpass
  • 9.3 Bridge Expansion Joints
  • 9.4 Bridge Bearing
  • 9.5 Bridge Railing
  • 9.6 Lighting, Energy Saving and Environmental Protection
  • 9.7 Other Attachments

1 Foreword

CJJ 161-2011 was issued by Ministry of Housing and Urban-Rural Development of the People's Republic of China on 15 March 2011.

The CJJ prefix, without a suffix, marks a mandatory standard: within its scope, compliance is required.

The document runs to 48 pages in English translation.

2 Scope Preview

This standard applies to post-tensioned oval digester wastewater treatment engineering design, construction and quality acceptance.

CJJ 161-2011 falls under ICS 13.060.30, in the field of environment and health protection, safety.

This catalogue holds 10 other CJJ standards in that field.

In this catalogue, CJJ standards carry edition years from 1985 to 2018.

3 About this standard

Issued by: Ministry of Housing and Urban-Rural Development of the People's Republic of China

English translation: about 48 pages

Chinese original: about 72,795 characters

4 Related standards

Standards on related subjects:

GB/T 18916.3-2022 — Norm of water intake—Part 3: Petroleum refining

GB/T 18916.31-2017 — Norm of water intake - Part 31 :Sintering and pelletizing for iron and steel industry

CJ/T 217-2013 — Compound quick air inbreathe-release valve for water supply pipeline

CJ/T 170-2018 — Ultrafiltration water treatment equipment

CJ/T 169-2018 — Microfiltration water treatment equipment

CJ/T 167-2016 — Multi-function control valve for pumping system

5 Classification and status

International classification (ICS): 13.060.30

Chinese Standard Classification (CCS): P 41

Prefix CJJ: mandatory standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 48 pages — is available in the English PDF.

How to Download CJJ 161-2011

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
48 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

CJJ 161-2011

$710.00