CJJ 160-2011Technical specification for public SPA pool water supply and drainage engineering (English PDF)
公共浴场给水排水工程技术规程
This is a limited preview
Buy now to download the full PDF (120 pages)
Need quotation for your management?
Get a formal quotation for CJJ 160-2011 in 30 minutes.
Issued by
Ministry of Housing and Urban-Rural Development of the People's Republic of China
Level / Type
National · Mandatory
Issue date
July 13, 2011
Implementation date
March 1, 2012
Scope
CJJ 160-2011 is the English-translated version of 公共浴场给水排水工程技术规程.
CJJ 160-2011 — This standard applies to new construction, expansion and renovation of the business of the public baths and societies of the public baths of water supply and drainage engineering design, construction, quality inspection, operation, maintenance and management.
Found what you need?
Document preview — CJJ 160-2011
National Standard of the People's Republic of China
- ICS
- 91.140.60; 91.140.80
- Classification
- P 40
Issued by: Ministry of Housing and Urban-Rural Development of the People's Republic of China
Contents
- [Preview only]
- 1 General provisions
- 2 Terms and symbols
- 2.1 Terms
- 2.2 Symbols
- 2.3 Service for operation and maintenance
- 2.4 Economic and environmental protection operation indexes
- 2.5 Spare parts
- 3 Materials
- 3.1 General requirements
- 3.2 Quality requirements
- 3.3 Design calculation parameters
- 3.4 Transportation and storage
- 3.5 Stop operating
- 3.6 Fault handling
- 3.7 Maintenance and overhaul
- 4 Design
- 4.2 Pipeline layout and laying
- 4.3 Pipeline hydraulic calculation
- 4.4 Pipeline structural design
- 4.5 Pipeline appurtenances and buttresses
- 4.6 Serviceability Limit State Calculation
- 4.7 Pipe Connection
- 4.8 Subgrade Treatment
- 4.9 Backfill Design
- 5 Construction
- 5.2 Trench excavation and soil treatment
- 5.3 Pipeline connection
- 5.4 Pipeline laying
- 5.5 Trench backfill
- 5.6 Pipeline appurtenances and auxiliaries installation
- 5.7 Connection of branch pipe/service pipe to existing pipeline
- 6 Water pressure test, flushing and disinfection
- 6.2 Water pressure test
- 6.3 Flushing and disinfection
- 6.4 Operation and regulation
- 7 Construction completion and final acceptance
- 7.2 Parameter detection
- 7.3 Parameter regulation and control
- 7.4 Computer automatic monitoring
- 7.5 Optimum operating condition
- 7.6 Dispatching
1 Foreword
CJJ 160-2011 was issued by Ministry of Housing and Urban-Rural Development of the People's Republic of China on 13 July 2011 and has been in force since 1 March 2012.
The CJJ prefix, without a suffix, marks a mandatory standard: within its scope, compliance is required.
The document runs to 120 pages in English translation.
2 Scope Preview
This standard applies to new construction, expansion and renovation of the business of the public baths and societies of the public baths of water supply and drainage engineering design, construction, quality inspection, operation, maintenance and management. Does not apply to residential pool, beach, medical institutions, medical treatment bath.
CJJ 160-2011 falls under ICS 91.140.60; 91.140.80, in the field of construction materials and building.
This catalogue holds 29 other CJJ standards in that field.
In this catalogue, CJJ standards carry edition years from 1985 to 2018.
3 About this standard
Issued by: Ministry of Housing and Urban-Rural Development of the People's Republic of China
English translation: about 120 pages
Chinese original: about 181,158 characters
4 Related standards
Standards on related subjects:
GB/T 18920-2020 — The reuse of urban recycling water—Water quality standard for urban miscellaneous use
GB/T 18921-2019 — The reuse of urban recycling water - Water quality standard for scenic environment use
GB/T 18919-2002 — The reuse of urban recycling water--Classifiedstandard
CJ/T 245-2021 — General technical specifications of building roof drains
CJ/T 164-2014 — Domestic water saving devices
5 Classification and status
International classification (ICS): 91.140.60; 91.140.80
Chinese Standard Classification (CCS): P 40
Prefix CJJ: mandatory standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 120 pages — is available in the English PDF.
How to Download CJJ 160-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
CJJ 274-2018 — Technical standard for deodorization of environmental sanitation facilities
CJJ 63-2018 — Polyethylene gas pipeline engineering technical standards
CJJ 122-2017 — Technical specification for water supply and drainage engineering of swimming pool
Secure payment via Stripe
Payments accepted
CJJ 160-2011
$2,150.00