CJJ 138-2010Technical specification for geothermal space heating engineering (English PDF)
城镇地热供热工程技术规程
This is a limited preview
Buy now to download the full PDF (59 pages)
Need quotation for your management?
Get a formal quotation for CJJ 138-2010 in 30 minutes.
Issued by
Ministry of Housing and Urban-Rural Development of the People's Republic of China
Level / Type
National · Mandatory
Issue date
April 17, 2010
Implementation date
October 1, 2010
Scope
CJJ 138-2010 is the English-translated version of 城镇地热供热工程技术规程.
CJJ 138-2010 — This standard applies to geothermal wells to extract geothermal fluid to heat the urban heating projects in the planning, design, construction, commissioning and operation management.
Found what you need?
Document preview — CJJ 138-2010
National Standard of the People's Republic of China
- ICS
- 91.140.10
- Classification
- P 46
Issued by: Ministry of Housing and Urban-Rural Development of the People's Republic of China
Contents
- [Preview only]
- 1 General provisions
- 2 Terms and symbols
- 2.1 Terms
- 2.2 Symbols
- 2.3 Service for operation and maintenance
- 2.4 Economic and environmental protection operation indexes
- 2.5 Spare parts
- 3 Materials
- 3.1 General requirements
- 3.2 Quality requirements
- 3.3 Design calculation parameters
- 3.4 Transportation and storage
- 3.5 Stop operating
- 3.6 Fault handling
- 3.7 Maintenance and overhaul
- 4 Design
- 4.2 Pipeline layout and laying
- 4.3 Pipeline hydraulic calculation
- 4.4 Pipeline structural design
- 4.5 Pipeline appurtenances and buttresses
- 4.6 Serviceability Limit State Calculation
- 4.7 Pipe Connection
- 4.8 Subgrade Treatment
- 4.9 Backfill Design
- 5 Construction
- 5.2 Trench excavation and soil treatment
- 5.3 Pipeline connection
- 5.4 Pipeline laying
- 5.5 Trench backfill
- 5.6 Pipeline appurtenances and auxiliaries installation
- 5.7 Connection of branch pipe/service pipe to existing pipeline
- 6 Water pressure test, flushing and disinfection
- 6.2 Water pressure test
- 6.3 Flushing and disinfection
- 6.4 Operation and regulation
- 7 Construction completion and final acceptance
- 7.2 Parameter detection
- 7.3 Parameter regulation and control
- 7.4 Computer automatic monitoring
- 7.5 Optimum operating condition
- 7.6 Dispatching
1 Foreword
CJJ 138-2010 was issued by Ministry of Housing and Urban-Rural Development of the People's Republic of China on 17 April 2010 and has been in force since 1 October 2010.
The CJJ prefix, without a suffix, marks a mandatory standard: within its scope, compliance is required.
The document runs to 59 pages in English translation.
2 Scope Preview
This standard applies to geothermal wells to extract geothermal fluid to heat the urban heating projects in the planning, design, construction, commissioning and operation management.
CJJ 138-2010 falls under ICS 91.140.10, in the field of construction materials and building.
This catalogue holds 29 other CJJ standards in that field.
In this catalogue, CJJ standards carry edition years from 1985 to 2018.
3 About this standard
Issued by: Ministry of Housing and Urban-Rural Development of the People's Republic of China
English translation: about 59 pages
Chinese original: about 88,895 characters
4 Related standards
Standards on related subjects:
GB/T 21087-2020 — Energy recovery ventilators for outdoor air handling
CJ/T 395-2012 — Gas-fired heating and hot water condensing combi-boilers
GB 25034-2010 — Gas-fired heating and hot water combi-boilers
CJJ/T 291-2019 — Chinese standard
CJ/T 246-2018 — Preformed directly buried steam insulating pipes and fittings for urban heating
CJ/T 179-2018 — Self-operated flow control valve
5 Classification and status
International classification (ICS): 91.140.10
Chinese Standard Classification (CCS): P 46
Prefix CJJ: mandatory standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 59 pages — is available in the English PDF.
How to Download CJJ 138-2010
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
CJJ 274-2018 — Technical standard for deodorization of environmental sanitation facilities
CJJ 63-2018 — Polyethylene gas pipeline engineering technical standards
CJJ 122-2017 — Technical specification for water supply and drainage engineering of swimming pool
CJJ 138-2010
$830.00