CJJ 131-2009Technical specification for sludge treatment of municipal wastewater treatment plant (English PDF)
城镇污水处理厂污泥处理技术规程
This is a limited preview
Buy now to download the full PDF (42 pages)
Need quotation for your management?
Get a formal quotation for CJJ 131-2009 in 30 minutes.
Issued by
Ministry of Housing and Urban-Rural Development of the People's Republic of China
Level / Type
National · Mandatory
Issue date
July 9, 2009
Implementation date
December 1, 2009
Scope
CJJ 131-2009 is the English-translated version of 城镇污水处理厂污泥处理技术规程.
CJJ 131-2009 — This standard applies to municipal wastewater treatment plant primary sludge, excess sludge and mixed sludge treatment design, construction inspection, operation and management, safety measures and monitoring and control.
Found what you need?
Document preview — CJJ 131-2009
National Standard of the People's Republic of China
- ICS
- 13.030.40
- Classification
- P 53
Issued by: Ministry of Housing and Urban-Rural Development of the People's Republic of China
Contents
- [Preview only]
- 1 General provisions
- 2 Terms and symbols
- 2.1 Terms
- 2.2 Symbols
- 2.3 Service for operation and maintenance
- 2.4 Economic and environmental protection operation indexes
- 2.5 Spare parts
- 3 Basic Requirements
- 3.1 General requirements
- 3.2 Quality requirements
- 3.3 Design calculation parameters
- 3.4 Transportation and storage
- 3.5 Seismic Conceptual Design
- 3.6 Fault handling
- 3.7 Maintenance and overhaul
- 4 Design
- 4.2 Pipeline layout and laying
- 4.3 Pipeline hydraulic calculation
- 4.4 Pipeline structural design
- 4.5 Pipeline appurtenances and buttresses
- 4.6 Serviceability Limit State Calculation
- 4.7 Pipe Connection
- 4.8 Subgrade Treatment
- 4.9 Backfill Design
- 5 Construction
- 5.2 Trench excavation and soil treatment
- 5.3 Pipeline connection
- 5.4 Pipeline laying
- 5.5 Trench backfill
- 5.6 Pipeline appurtenances and auxiliaries installation
- 5.7 Connection of branch pipe/service pipe to existing pipeline
- 6 Water pressure test, flushing and disinfection
- 6.2 Water pressure test
- 6.3 Flushing and disinfection
- 6.4 Time History Analysis Method
- 6.5 Seismic Analysis for Regular Bridges
- 6.6 Calculation for Capacity Protected Member
- 6.7 Bridge Abutment
- 7 Construction completion and final acceptance
- 7.2 Seismic Check for E1 Earthquake
- 7.3 Seismic Check for E2 Earthquake
- 7.4 Seismic Check for Capacity Protected Members
- 7.5 Structural calculation of inspection well
- 7.6 Dispatching
- 8 Grade Separation Junction, Viaduct and Underpass
- 8.2 Grade Separation Junction and Viaduct
- 8.3 Underpass
- 8.4 Structural calculation of tunnel
- 9 Bridge Detail Structures and Attachments
- 9.2 Drainage and Waterproofing Design of Bridge Deck and Underpass
- 9.3 Bridge Expansion Joints
- 9.4 Bridge Bearing
- 9.5 Bridge Railing
- 9.6 Lighting, Energy Saving and Environmental Protection
- 9.7 Other Attachments
1 Foreword
CJJ 131-2009 was issued by Ministry of Housing and Urban-Rural Development of the People's Republic of China on 9 July 2009 and has been in force since 1 December 2009.
The CJJ prefix, without a suffix, marks a mandatory standard: within its scope, compliance is required.
The document runs to 42 pages in English translation.
2 Scope Preview
This standard applies to municipal wastewater treatment plant primary sludge, excess sludge and mixed sludge treatment design, construction inspection, operation and management, safety measures and monitoring and control. This procedure does not apply to municipal wastewater pretreatment produced grit and screenings handling, and municipal wastewater treatment plant sludge disposal or use.
CJJ 131-2009 falls under ICS 13.030.40, in the field of environment and health protection, safety.
This catalogue holds 10 other CJJ standards in that field.
In this catalogue, CJJ standards carry edition years from 1985 to 2018.
3 About this standard
Issued by: Ministry of Housing and Urban-Rural Development of the People's Republic of China
English translation: about 42 pages
Chinese original: about 63,664 characters
4 Related standards
Standards on related subjects:
GB/T 16311-2024 — Specification and test method for road traffic markings
CJJ/T 150-2023 — Technical standards for domestic waste leachate treatment (with explanations)
CJ/T 135-2018 — Flower bulbs for green space and landscape. Bulb
CJJ 128-2017 — Technical standard for operation maintenance and safety of municipal solid waste incineration plant
5 Classification and status
International classification (ICS): 13.030.40
Chinese Standard Classification (CCS): P 53
Prefix CJJ: mandatory standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 42 pages — is available in the English PDF.
How to Download CJJ 131-2009
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
CJJ 274-2018 — Technical standard for deodorization of environmental sanitation facilities
CJJ 63-2018 — Polyethylene gas pipeline engineering technical standards
CJJ 122-2017 — Technical specification for water supply and drainage engineering of swimming pool
CJJ 131-2009
$435.00