CJ/T 435-2013Aluminum-plastic laminated pipe and fitting for the supply of gaseous fuels (English PDF)
燃气用铝合金衬塑复合管材及管件
This is a limited preview
Buy now to download the full PDF (11 pages)
Need quotation for your management?
Get a formal quotation for CJ/T 435-2013 in 30 minutes.
Issued by
Ministry of Housing and Urban-Rural Development of the People's Republic of China
Level / Type
National · Recommended
Issue date
June 25, 2013
Implementation date
December 1, 2013
Scope
CJ/T 435-2013 is the English-translated version of 燃气用铝合金衬塑复合管材及管件.
CJ/T 435-2013 — This standard specifies the terms and definitions, symbols, materials, requirements, test methods, inspection of aluminum alloy plastic composite pipe and fittings for gas Rules, marking, packaging, shipping and storage.
This standard applies to the working pressure of not more than 0.4MPa, the nominal diameter of not more than DN100 indoor gas transmission aluminum alloy lined Composite pipe and fittings. Overall use (design) coefficient C >= 2.
Found what you need?
Document preview — CJ/T 435-2013
National Standard of the People's Republic of China
- ICS
- 91.140
- Classification
- P 47
Issued by: Ministry of Housing and Urban-Rural Development of the People's Republic of China
Contents
- What this standard covers1
- Document data2
- Standards quoted by this document3
What this standard covers
This standard specifies: Gas lined with aluminum composite pipe and fittings terms and definitions, symbols, materials, requirements, test methods, inspection rules, signs, packaging, transport and storage. This standard applies to: working pressure of no
Document data
International classification (ICS): 91.140.
Chinese classification (CCS): P47.
Estimated length of the Chinese original: 15,172 words.
Standards quoted by this document
GB/T 2828.1; GB/T 2918; GB/T 3190; GB/T 3682; GB/T 4437.1; GB/T 6111; GB/T 6671; GB/T 7307; GB/T 8806; GB 15558.1; GB 15558.2; GB/T 17391
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 11 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 2828.1Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
- GB/T 2918Plastics -- Standard atmospheres for conditioning and testing
- GB/T 3190Chemical composition of wrought aluminium and aluminium alloys
- GB/T 3682Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
- GB/T 4437.1Aluminium and aluminium alloys extruded tubes—Part 1: Seamless tubes
- GB/T 7307Pipe threads with 55-degree thread angle where pressure-tight joints are not made on the threads
GB 15558.1
How to Download CJ/T 435-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 15558.2-2005 — Buried polyethylene (PE) piping systems for the supply of gaseous fuels—Part 2:Fittings
GB/T 2828.1-2012 — Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
GB/T 2828.10-2010 — Sampling procedures for inspection by attributes -- Part 10: Introduction to the GB/T 2828 series of standards for sampling for inspection by attributes
Secure payment via Stripe
Payments accepted
CJ/T 435-2013
$305.00