CECS 396-2015Technical specification for application of assembled glass fiber reinforced inorganic materials composite insulation walloard (English PDF)
装配式玻纤增强无机材料复合保温墙板应用技术规程
This is a limited preview
Buy now to download the full PDF (48 pages)
Need quotation for your management?
Get a formal quotation for CECS 396-2015 in 30 minutes.
Issued by
China Association for Engineering Construction Standardization
Level / Type
National · Mandatory
Issue date
February 12, 2015
Implementation date
June 1, 2015
Scope
CECS 396-2015 is the English-translated version of 装配式玻纤增强无机材料复合保温墙板应用技术规程.
CECS 396-2015 — Technical specification for application of assembled glass fiber reinforced inorganic materials composite insulation walloard
Found what you need?
Document preview — CECS 396-2015
National Standard of the People's Republic of China
- ICS
- 91.120.10
- Classification
- P 32
Issued by: China Association for Engineering Construction Standardization
Contents
- [Preview only]
- 1 General Provisions
- 2 Terms and Symbols
- 2.1 Terms
- 2.2 Symbols
- 3 Materials
- 3.1 General Requirements
- 3.2 Determination of Estimated Strength of Concrete with Dilled Cores
- 3.3 Drilled Core Correction Method
- 4 Major Equipments
- 4.2 Tension Cable and Anchor
- 4.3 Load
- 4.4 Detailing requirements
- 4.5 Artificial Filling Foundation Treatment by Heavy Tamping
- 5 Structural Calculation
- 5.2 Analysis of Initial State of Form
- 5.3 Analysis of Effects under Loads
- 5.4 Analysis of Pattern Cutting
- 5.5 Construction Quality Control and Monitor
- 5.6 Environmental Protection
- 6 Processing of Core or Technical Requirements of Specimen
- 6.2 Connection between Membrane Materials
- 6.3 Connection between Membrane and Rigid Boundary
- 6.4 Connection between Membrane and Flexible Boundary
- 6.5 Painting
- 7 Test of Core Specimen and Calculation of Compressive Strength
- 7.2 Inspection items
- 7.3 Qualification judgment
- 7.4 Maintenance
- 8 Erection
- 8.1 Erection of Steel Members and Tension Cables
- 8.2 Erection of Membrane Elements
- 8.3 Application of Pretension Force
- 8.4 Nondestructive Testing of Connection of Structural Steel Casting
- 8.5 Marking, Storage and Transport
- 9 Acceptance
1 Foreword
CECS 396-2015 was issued by China Association for Engineering Construction Standardization on 12 February 2015 and has been in force since 1 June 2015.
The CECS prefix marks a association standard of the engineering construction sector, adopted voluntarily.
The document runs to 48 pages in English translation.
2 Scope Preview
This Standard applies to non-seismic area and the seismic intensity of 8 degrees and the following areas, general industrial and civil construction works of non-load-bearing wall and the inner peripheral wall of the design, manufacture, installation and acceptance. Peripheral siding application height should not exceed, manufacture, installation and acceptance. Peripheral siding application height should not exceed 100m.
CECS 396-2015 falls under ICS 91.120.10, in the field of construction materials and building.
This catalogue holds 144 other CECS standards in that field.
In this catalogue, CECS standards carry edition years from 1988 to 2016.
3 About this standard
Issued by: China Association for Engineering Construction Standardization
English translation: about 48 pages
Chinese original: about 72,713 characters
4 Related standards
Standards on related subjects:
GB/T 8478-2020 — Aluminium windows and doors
JG/T 231-2018 — Technical requirements of building glass skylight system
CECS 427-2016 — Technical specification for grounding exothermic welding
CECS 428-2016 — Technical specification for copper electroformed ground rod (wire)
CECS 398-2015 — Technical specification for application of diatomaceous decorative interior wall materials
5 Classification and status
International classification (ICS): 91.120.10
Chinese Standard Classification (CCS): P 32
Prefix CECS: association standard of the engineering construction sector, adopted voluntarily.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 48 pages — is available in the English PDF.
How to Download CECS 396-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
CECS 147-2016 — Technical specification for soil mass with reinforced cement soil pile and anchors
CECS 242-2016 — Technical specification for strengthening concrete structures with grid rebar and mortar
CECS 27-2016 — Technical specification for cement castable refractories construction in winter of industrial furnaces
CECS 396-2015
$630.00