Valid

CECS 292-2011Technical specification for design of lectotype and distribution on gas fire-suppression facilities (English PDF)

气体消防设施选型配置设计规程

Preview PDF

This is a limited preview

Buy now to download the full PDF (55 pages)

Need quotation for your management?

Get a formal quotation for CECS 292-2011 in 30 minutes.

Issued by

China Association for Engineering Construction Standardization

Level / Type

National · Mandatory

Issue date

April 20, 2011

Implementation date

August 1, 2011

Scope

CECS 292-2011 is the English-translated version of 气体消防设施选型配置设计规程.

CECS 292-2011 — Technical specification for design of lectotype and distribution on gas fire-suppression facilities

Found what you need?

Document preview — CECS 292-2011

National Standard of the People's Republic of China

ICS
13.220.30
Classification
C 84

Issued by: China Association for Engineering Construction Standardization

Contents

  • [Preview only]
  • 1 General Provisions
  • 2 Terms and Symbols
  • 2.1 Terms
  • 2.2 Symbols
  • 3 Materials
  • 3.1 General Requirements
  • 3.2 Determination of Estimated Strength of Concrete with Dilled Cores
  • 3.3 Drilled Core Correction Method
  • 4 Design
  • 4.2 Calculation of Earthquake Action and Earthquake Response
  • 4.3 Design of Isolation Layer
  • 4.4 Design of Structural Elements Above the Isolation Layer
  • 4.5 Design of the Structural Elements below Isolation Layer and of the Soil and Foundation
  • 5 Structural Calculation
  • 5.2 Design of Seismic Isolator
  • 5.3 Installation
  • 5.4 Construction Requirements
  • 5.5 Construction Quality Control and Monitor
  • 5.6 Environmental Protection
  • 6 Processing of Core or Technical Requirements of Specimen
  • 6.3 Connection between Membrane and Rigid Boundary
  • 6.4 Connection between Membrane and Flexible Boundary
  • 6.5 Action Effect Combination
  • 7 Test of Core Specimen and Calculation of Compressive Strength
  • 7.1 Construction and Installation
  • 7.2 Construction Survey
  • 7.3 Project Acceptance
  • 7.4 Maintenance of Isolation Layers
  • 7.5 Critical Temperature of Steel Frame Beam and Column
  • 8 Detailing Requirements
  • 8.1 Erection of Steel Members and Tension Cables
  • 8.2 Erection of Membrane Elements
  • 8.3 Application of Pretension Force
  • 8.4 Nondestructive Testing of Connection of Structural Steel Casting
  • 8.5 Marking, Storage and Transport
  • 9 Acceptance
  • 9.1 Protection Measures and Selection Principle
  • 9.2 Construction

1 Foreword

CECS 292-2011 was issued by China Association for Engineering Construction Standardization on 20 April 2011 and has been in force since 1 August 2011.

The CECS prefix marks a association standard of the engineering construction sector, adopted voluntarily.

The document runs to 55 pages in English translation.

2 Scope Preview

This standard applies to newly built, selection renovation and expansion of industrial and civil gas fire service fire safety design configuration design.

CECS 292-2011 falls under ICS 13.220.30, in the field of environment and health protection, safety.

This catalogue holds 12 other CECS standards in that field.

In this catalogue, CECS standards carry edition years from 1988 to 2016.

3 About this standard

Issued by: China Association for Engineering Construction Standardization

English translation: about 55 pages

Chinese original: about 82,896 characters

4 Related standards

Standards on related subjects:

GB 4351-2023 — Portable fire extinguishers

GA 602-2013 — Dry-powder fire-extinguishing device

GB 4066.2-2004 — Fire extinguishing media -- Part 2: ABC powder

CECS 394-2015 — Technical specification for heptafluoropropane foam extingushing system

CECS 391-2014 — Technical specification for fire protection system of wind turbine generator system

CECS 359-2014 — Technical specification for trifluoromethane extinguishing systems

5 Classification and status

International classification (ICS): 13.220.30

Chinese Standard Classification (CCS): C 84

Prefix CECS: association standard of the engineering construction sector, adopted voluntarily.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 55 pages — is available in the English PDF.

How to Download CECS 292-2011

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
55 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

CECS 292-2011

$800.00