Valid

CECS 278-2010Technical specification for testing of concrete compressive strength by shear-pressure method (English PDF)

剪压法检测混凝土抗压强度技术规程

Preview PDF

This is a limited preview

Buy now to download the full PDF (25 pages)

Need quotation for your management?

Get a formal quotation for CECS 278-2010 in 30 minutes.

Issued by

China Association for Engineering Construction Standardization

Level / Type

National · Mandatory

Issue date

July 1, 2010

Implementation date

September 1, 2010

Scope

CECS 278-2010 is the English-translated version of 剪压法检测混凝土抗压强度技术规程.

CECS 278-2010 — This standard applies to section with a right-angled edge, structural concrete compressive strength can be applied shear stress (hereinafter referred to as concrete strength) detection.

When the structure of the concrete strength testing requirements inches, according to the procedures for testing and estimating the strength of concrete, the test results can be used as basis for handling concrete strength issues.

Found what you need?

Document preview — CECS 278-2010

National Standard of the People's Republic of China

ICS
91.100.30
Classification
Q 13

Issued by: China Association for Engineering Construction Standardization

Contents

  • [Preview only]
  • 1 General Provisions
  • 2 Terms and Symbols
  • 2.1 Terms
  • 2.2 Symbols
  • 3 Materials
  • 3.1 General Requirements
  • 3.2 Determination of Estimated Strength of Concrete with Dilled Cores
  • 3.3 Drilled Core Correction Method
  • 4 Major Equipments
  • 4.2 Tension Cable and Anchor
  • 4.3 Load
  • 4.4 Detailing requirements
  • 4.5 Artificial Filling Foundation Treatment by Heavy Tamping
  • 5 Structural Calculation
  • 5.2 Analysis of Initial State of Form
  • 5.3 Analysis of Effects under Loads
  • 5.4 Analysis of Pattern Cutting
  • 5.5 Construction Quality Control and Monitor
  • 5.6 Environmental Protection
  • 6 Processing of Core or Technical Requirements of Specimen
  • 6.2 Connection between Membrane Materials
  • 6.3 Connection between Membrane and Rigid Boundary
  • 6.4 Connection between Membrane and Flexible Boundary
  • 6.5 Painting
  • 7 Test of Core Specimen and Calculation of Compressive Strength
  • 7.2 Inspection items
  • 7.3 Qualification judgment
  • 7.4 Maintenance
  • 8 Erection
  • 8.1 Erection of Steel Members and Tension Cables
  • 8.2 Erection of Membrane Elements
  • 8.3 Application of Pretension Force
  • 8.4 Nondestructive Testing of Connection of Structural Steel Casting
  • 8.5 Marking, Storage and Transport
  • 9 Acceptance

1 Foreword

CECS 278-2010 was issued by China Association for Engineering Construction Standardization on 1 July 2010 and has been in force since 1 September 2010.

The CECS prefix marks a association standard of the engineering construction sector, adopted voluntarily.

The document runs to 25 pages in English translation.

2 Scope Preview

This standard applies to section with a right-angled edge, structural concrete compressive strength can be applied shear stress (hereinafter referred to as concrete strength) detection. When the structure of the concrete strength testing requirements inches, according to the procedures for testing and estimating the strength of concrete, the test results can be used as basis for handling concrete strength issues. This procedure does not apply to the surface and there are significant differences in the internal quality defects or internal structural concrete strength testing.

CECS 278-2010 falls under ICS 91.100.30, in the field of construction materials and building.

This catalogue holds 144 other CECS standards in that field.

In this catalogue, CECS standards carry edition years from 1988 to 2016.

3 About this standard

Issued by: China Association for Engineering Construction Standardization

English translation: about 25 pages

Chinese original: about 37,390 characters

4 Related standards

Standards on related subjects:

JGJ/T 308-2013 — Technical Specification for Application of Phosphorous Slag Powder Concrete

CECS 389-2014 — Unplug assay cement and fiber cement mortar strength Technical Specification

CECS 361-2013 — Technical specification for application of ecological concrete

CECS 311-2012 — Technical specification for special mortar in non-fired bulk materials masonry wall

5 Classification and status

International classification (ICS): 91.100.30

Chinese Standard Classification (CCS): Q 13

Prefix CECS: association standard of the engineering construction sector, adopted voluntarily.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 25 pages — is available in the English PDF.

How to Download CECS 278-2010

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
25 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

CECS 278-2010

$195.00