CECS 262-2009Technical specification for foamed cement insulating coures and cement mortar filler course of floor radiant heating (English PDF)
发泡水泥绝热层与水泥砂浆填充层地面辐射供暖工程技术规程
This is a limited preview
Buy now to download the full PDF (24 pages)
Need quotation for your management?
Get a formal quotation for CECS 262-2009 in 30 minutes.
Issued by
China Association for Engineering Construction Standardization
Level / Type
National · Mandatory
Issue date
September 23, 2009
Implementation date
December 1, 2009
Scope
CECS 262-2009 is the English-translated version of 发泡水泥绝热层与水泥砂浆填充层地面辐射供暖工程技术规程.
CECS 262-2009 — This standard applies to the ordinary civil and industrial construction projects foam cement floor radiant heating insulation layer, design filled with cement mortar layer, construction and acceptance.
Found what you need?
Document preview — CECS 262-2009
National Standard of the People's Republic of China
- ICS
- 91.140.20
- Classification
- P 46
Issued by: China Association for Engineering Construction Standardization
Contents
- [Preview only]
- 1 General Provisions
- 2 Terms and Symbols
- 2.1 Terms
- 2.2 Symbols
- 3 Materials
- 3.1 General Requirements
- 3.2 Determination of Estimated Strength of Concrete with Dilled Cores
- 3.3 Drilled Core Correction Method
- 4 Major Equipments
- 4.2 Tension Cable and Anchor
- 4.3 Load
- 4.4 Detailing requirements
- 4.5 Artificial Filling Foundation Treatment by Heavy Tamping
- 5 Structural Calculation
- 5.2 Analysis of Initial State of Form
- 5.3 Analysis of Effects under Loads
- 5.4 Analysis of Pattern Cutting
- 5.5 Construction Quality Control and Monitor
- 5.6 Environmental Protection
- 6 Processing of Core or Technical Requirements of Specimen
- 6.2 Connection between Membrane Materials
- 6.3 Connection between Membrane and Rigid Boundary
- 6.4 Connection between Membrane and Flexible Boundary
- 6.5 Painting
- 7 Test of Core Specimen and Calculation of Compressive Strength
- 7.2 Inspection items
- 7.3 Qualification judgment
- 7.4 Maintenance
- 8 Erection
- 8.1 Erection of Steel Members and Tension Cables
- 8.2 Erection of Membrane Elements
- 8.3 Application of Pretension Force
- 8.4 Nondestructive Testing of Connection of Structural Steel Casting
- 8.5 Marking, Storage and Transport
- 9 Acceptance
1 Foreword
CECS 262-2009 was issued by China Association for Engineering Construction Standardization on 23 September 2009 and has been in force since 1 December 2009.
The CECS prefix marks a association standard of the engineering construction sector, adopted voluntarily.
The document runs to 24 pages in English translation.
2 Scope Preview
This standard applies to the ordinary civil and industrial construction projects foam cement floor radiant heating insulation layer, design filled with cement mortar layer, construction and acceptance. Change, expansion project to address security load existing buildings be checked.
CECS 262-2009 falls under ICS 91.140.20, in the field of construction materials and building.
This catalogue holds 144 other CECS standards in that field.
In this catalogue, CECS standards carry edition years from 1988 to 2016.
3 About this standard
Issued by: China Association for Engineering Construction Standardization
English translation: about 24 pages
Chinese original: about 36,341 characters
4 Related standards
Standards on related subjects:
GB/T 21087-2020 — Energy recovery ventilators for outdoor air handling
CJ/T 395-2012 — Gas-fired heating and hot water condensing combi-boilers
GB 25034-2010 — Gas-fired heating and hot water combi-boilers
CECS 443-2016 — Technical specification for external thermal insulation composite systems based on cellular glass board
CECS 433-2016 — Technical specification for construction of capillary mat heating and radiant cooling system
CECS 424-2016 — Technical specification for application of pre-grooved insulation board floor radiant heating
5 Classification and status
International classification (ICS): 91.140.20
Chinese Standard Classification (CCS): P 46
Prefix CECS: association standard of the engineering construction sector, adopted voluntarily.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 24 pages — is available in the English PDF.
How to Download CECS 262-2009
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
CECS 147-2016 — Technical specification for soil mass with reinforced cement soil pile and anchors
CECS 242-2016 — Technical specification for strengthening concrete structures with grid rebar and mortar
CECS 27-2016 — Technical specification for cement castable refractories construction in winter of industrial furnaces
CECS 262-2009
$225.00