CECS 186-2005Specification for construction quality acceptance of polygon oil seal gasholder (English PDF)
多边形稀油密封储气柜工程施工质量验收规程
This is a limited preview
Buy now to download the full PDF (46 pages)
Need quotation for your management?
Get a formal quotation for CECS 186-2005 in 30 minutes.
Issued by
China Association for Engineering Construction Standardization
Level / Type
National · Mandatory
Issue date
July 25, 2005
Implementation date
October 1, 2005
Scope
CECS 186-2005 is the English-translated version of 多边形稀油密封储气柜工程施工质量验收规程.
CECS 186-2005 is the Chinese standard "Specification for construction quality acceptance of polygon oil seal gasholder". This standard applies to: City gas and metallurgical industries polygon gas gas tank ontology engineering construction quality acceptance.
Other sectors of the same type storage tank may refer to the use and acceptance of construction quality. Issued on 2005-07-25, in force from 2005-10-01.
Found what you need?
Document preview — CECS 186-2005
National Standard of the People's Republic of China
- Classification
- P47
Contents
- [Preview only]
- 1 General Provisions
- 2 Terms and Symbols
- 2.1 Terms
- 2.2 Symbols
- 3 Materials
- 3.1 General Requirements
- 3.2 Determination of Estimated Strength of Concrete with Dilled Cores
- 3.3 Drilled Core Correction Method
- 4 Design
- 4.2 Calculation of Earthquake Action and Earthquake Response
- 4.3 Design of Isolation Layer
- 4.4 Design of Structural Elements Above the Isolation Layer
- 4.5 Design of the Structural Elements below Isolation Layer and of the Soil and Foundation
- 5 Structural Calculation
- 5.2 Design of Seismic Isolator
- 5.3 Installation
- 5.4 Construction Requirements
- 5.5 Construction Quality Control and Monitor
- 5.6 Environmental Protection
- 6 Processing of Core or Technical Requirements of Specimen
- 6.3 Connection between Membrane and Rigid Boundary
- 6.4 Connection between Membrane and Flexible Boundary
- 6.5 Action Effect Combination
- 7 Test of Core Specimen and Calculation of Compressive Strength
- 7.1 Construction and Installation
- 7.2 Construction Survey
- 7.3 Project Acceptance
- 7.4 Maintenance of Isolation Layers
- 7.5 Critical Temperature of Steel Frame Beam and Column
- 8 Detailing Requirements
- 8.1 Erection of Steel Members and Tension Cables
- 8.2 Erection of Membrane Elements
- 8.3 Application of Pretension Force
- 8.4 Nondestructive Testing of Connection of Structural Steel Casting
- 8.5 Marking, Storage and Transport
- 9 Acceptance
- 9.1 Protection Measures and Selection Principle
- 9.2 Construction
1 Foreword
CECS 186-2005 was issued by China Association for Engineering Construction Standardization on 25 July 2005 and has been in force since 1 October 2005.
The CECS prefix marks a association standard of the engineering construction sector, adopted voluntarily.
The document runs to 46 pages in English translation.
2 Scope Preview
This standard applies to: City gas and metallurgical industries polygon gas gas tank ontology engineering construction quality acceptance. Other sectors of the same type storage tank may refer to the use and acceptance of construction quality.
CECS 186-2005 is filed under Chinese Standard Classification P47, in the field of engineering construction.
This catalogue holds 136 other CECS standards without an ICS number.
In this catalogue, CECS standards carry edition years from 1988 to 2016.
3 About this standard
Sector: Construction Industry Standard
Issued by: China Association for Engineering Construction Standardization
English translation: about 46 pages (approximate)
Chinese original: about 69,682 characters
4 Related standards
Standards on related subjects:
GB 27790-2020 — City gas pressure regulator
GB 25035-2010 — Dimethyl ether for city gas
CJ/T 112-2008 — Integrated circuit card diaphragm gas meter
CECS 461-2016 — Technical specification for double press stainless steel gas pipeline
CECS 390-2014 — Technical specification for application of exhaust duct system in residential buildings
CECS 364-2014 — Technical guideline for building gas safety application
5 Classification and status
Chinese Standard Classification (CCS): P 47
Prefix CECS: association standard of the engineering construction sector, adopted voluntarily.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 46 pages — is available in the English PDF.
How to Download CECS 186-2005
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
CECS 147-2016 — Technical specification for soil mass with reinforced cement soil pile and anchors
CECS 242-2016 — Technical specification for strengthening concrete structures with grid rebar and mortar
CECS 27-2016 — Technical specification for cement castable refractories construction in winter of industrial furnaces
Secure payment via Stripe
Payments accepted
CECS 186-2005
$890.00