Valid

CECS 166-2004Specification for construction and acceptance of ceramic industrial kilns (English PDF)

陶瓷工业窑炉施工及验收规程

Preview PDF

This is a limited preview

Buy now to download the full PDF (50 pages)

Need quotation for your management?

Get a formal quotation for CECS 166-2004 in 30 minutes.

Issued by

China Association for Engineering Construction Standardization

Level / Type

National · Mandatory

Issue date

November 1, 2004

Implementation date

December 1, 2004

Scope

CECS 166-2004 is the English-translated version of 陶瓷工业窑炉施工及验收规程.

CECS 166-2004 is the Chinese standard "Specification for construction and acceptance of ceramic industrial kilns". This standard applies to: Ceramic Industry tunnel kiln (including push board kiln and roller kiln), shuttle kiln (including drawer kiln, Bell kiln, kiln car, etc.) project construction and acceptance. Issued on 2004-11-01, in force from 2004-12-01.

Found what you need?

Document preview — CECS 166-2004

National Standard of the People's Republic of China

Classification
P74

Contents

  • [Preview only]
  • 1 General Provisions
  • 2 Terms and Symbols
  • 2.1 Terms
  • 2.2 Symbols
  • 3 Materials
  • 3.1 General Requirements
  • 3.2 Determination of Estimated Strength of Concrete with Dilled Cores
  • 3.3 Drilled Core Correction Method
  • 4 Design
  • 4.2 Calculation of Earthquake Action and Earthquake Response
  • 4.3 Design of Isolation Layer
  • 4.4 Design of Structural Elements Above the Isolation Layer
  • 4.5 Design of the Structural Elements below Isolation Layer and of the Soil and Foundation
  • 5 Structural Calculation
  • 5.2 Design of Seismic Isolator
  • 5.3 Installation
  • 5.4 Construction Requirements
  • 5.5 Construction Quality Control and Monitor
  • 5.6 Environmental Protection
  • 6 Processing of Core or Technical Requirements of Specimen
  • 6.3 Connection between Membrane and Rigid Boundary
  • 6.4 Connection between Membrane and Flexible Boundary
  • 6.5 Action Effect Combination
  • 7 Test of Core Specimen and Calculation of Compressive Strength
  • 7.1 Construction and Installation
  • 7.2 Construction Survey
  • 7.3 Project Acceptance
  • 7.4 Maintenance of Isolation Layers
  • 7.5 Critical Temperature of Steel Frame Beam and Column
  • 8 Detailing Requirements
  • 8.1 Erection of Steel Members and Tension Cables
  • 8.2 Erection of Membrane Elements
  • 8.3 Application of Pretension Force
  • 8.4 Nondestructive Testing of Connection of Structural Steel Casting
  • 8.5 Marking, Storage and Transport
  • 9 Acceptance
  • 9.1 Protection Measures and Selection Principle
  • 9.2 Construction

1 Foreword

CECS 166-2004 was issued by China Association for Engineering Construction Standardization on 1 November 2004 and has been in force since 1 December 2004.

The CECS prefix marks a association standard of the engineering construction sector, adopted voluntarily.

The document runs to 50 pages in English translation.

2 Scope Preview

This standard applies to: Ceramic Industry tunnel kiln (including push board kiln and roller kiln), shuttle kiln (including drawer kiln, Bell kiln, kiln car, etc.) project construction and acceptance.

CECS 166-2004 is filed under Chinese Standard Classification P74, in the field of engineering construction.

This catalogue holds 136 other CECS standards without an ICS number.

In this catalogue, CECS standards carry edition years from 1988 to 2016.

3 About this standard

Sector: Construction Industry Standard

Issued by: China Association for Engineering Construction Standardization

English translation: about 50 pages (approximate)

Chinese original: about 74,729 characters

4 Related standards

Standards on related subjects:

GB 50959-2013 — Load code of nonferrous metals engineering structures

GB 30485-2013 — Standard for pollution control on co-processing of solid wastes in cement kiln

GB 50717-2011 — Code for extractive metallurgy construction quality acceptance of mechanical equipment installation engineering of heavy non-ferrous metals

5 Classification and status

Chinese Standard Classification (CCS): P 74

Prefix CECS: association standard of the engineering construction sector, adopted voluntarily.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 50 pages — is available in the English PDF.

How to Download CECS 166-2004

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
50 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

CECS 166-2004

$870.00