Valid

CECS 160-2004General rule for performance-based seismic design of buildings (English PDF)

建筑工程抗震性态设计通则(试用)

Preview PDF

This is a limited preview

Buy now to download the full PDF (150 pages)

Need quotation for your management?

Get a formal quotation for CECS 160-2004 in 30 minutes.

Issued by

China Association for Engineering Construction Standardization

Level / Type

National · Mandatory

Issue date

May 25, 2004

Implementation date

August 1, 2004

Scope

CECS 160-2004 is the English-translated version of 建筑工程抗震性态设计通则(试用).

CECS 160-2004 is the Chinese standard "General rule for performance-based seismic design of buildings". This standard applies to: seismic intensity of not more than 9 degrees (basic design earthquake acceleration value is not more than 0.

40g) region construction seismic design, seismic isolation design and quality control. Issued on 2004-05-25, in force from 2004-08-01.

Found what you need?

Document preview — CECS 160-2004

National Standard of the People's Republic of China

ICS
14.120.25
Classification
P15

Contents

  • [Preview only]
  • 1 General Provisions
  • 2 Terms and Symbols
  • 2.1 Terms
  • 2.2 Symbols
  • 3 Materials
  • 3.1 General Requirements
  • 3.2 Determination of Estimated Strength of Concrete with Dilled Cores
  • 3.3 Drilled Core Correction Method
  • 4 Design
  • 4.2 Calculation of Earthquake Action and Earthquake Response
  • 4.3 Design of Isolation Layer
  • 4.4 Design of Structural Elements Above the Isolation Layer
  • 4.5 Design of the Structural Elements below Isolation Layer and of the Soil and Foundation
  • 5 Structural Calculation
  • 5.2 Design of Seismic Isolator
  • 5.3 Installation
  • 5.4 Construction Requirements
  • 5.5 Construction Quality Control and Monitor
  • 5.6 Environmental Protection
  • 6 Processing of Core or Technical Requirements of Specimen
  • 6.3 Connection between Membrane and Rigid Boundary
  • 6.4 Connection between Membrane and Flexible Boundary
  • 6.5 Action Effect Combination
  • 7 Test of Core Specimen and Calculation of Compressive Strength
  • 7.1 Construction and Installation
  • 7.2 Construction Survey
  • 7.3 Project Acceptance
  • 7.4 Maintenance of Isolation Layers
  • 7.5 Critical Temperature of Steel Frame Beam and Column
  • 8 Detailing Requirements
  • 8.1 Erection of Steel Members and Tension Cables
  • 8.2 Erection of Membrane Elements
  • 8.3 Application of Pretension Force
  • 8.4 Nondestructive Testing of Connection of Structural Steel Casting
  • 8.5 Marking, Storage and Transport
  • 9 Acceptance
  • 9.1 Protection Measures and Selection Principle
  • 9.2 Construction

1 Foreword

CECS 160-2004 was issued by China Association for Engineering Construction Standardization on 25 May 2004 and has been in force since 1 August 2004.

The CECS prefix marks a association standard of the engineering construction sector, adopted voluntarily.

The document runs to 150 pages in English translation.

2 Scope Preview

This standard applies to: seismic intensity of not more than 9 degrees (basic design earthquake acceleration value is not more than 0. 40g) region construction seismic design, seismic isolation design and quality control.

CECS 160-2004 is filed under Chinese Standard Classification P15, in the field of engineering construction.

This catalogue holds 136 other CECS standards without an ICS number.

In this catalogue, CECS standards carry edition years from 1988 to 2016.

3 About this standard

Sector: Construction Industry Standard

Issued by: China Association for Engineering Construction Standardization

English translation: about 150 pages (approximate)

Chinese original: about 225,276 characters

4 Related standards

Standards on related subjects:

DB/T 59-2015 — Technical requirements for seismic observation instruments joining the network - Seismic intensity meter

DB/T 60-2015 — Specification for the construction of seismic stations - Stations for rapid reporting of seismic intensity and earthquake early warning

5 Classification and status

International classification (ICS): 14.120.25

Chinese Standard Classification (CCS): P 15

Prefix CECS: association standard of the engineering construction sector, adopted voluntarily.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 150 pages — is available in the English PDF.

How to Download CECS 160-2004

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
150 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

CECS 160-2004

$2,600.00