CB/T 4530-2023Calculation of Longitudinal Vibration of Marine Diesel Engine Shafting (English PDF)
船舶柴油机轴系纵振计算
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for CB/T 4530-2023 in 30 minutes.
Issued by
Ministry of Industry and Information Technology of the People's Republic of China
Level / Type
National · Recommended
Issue date
April 21, 2023
Implementation date
November 1, 2023
Scope
CB/T 4530-2023 is the English-translated version of 船舶柴油机轴系纵振计算.
CB/T 4530-2023 is the Chinese standard "Calculation of Longitudinal Vibration of Marine Diesel Engine Shafting".
This standard specifies the calculation method for longitudinal vibration of ship diesel engine direct drive and gear drive propulsion shafting, mainly including the basic principles of longitudinal vibration, conversion of longitudinal vibration equivalent system, calculation of natural vibration frequency and mode shape of longitudinal vibration, and excitation force of longitudinal vibration.
Calculation, damping of longitudinal vibration, forced response of longitudinal vibration, allowable amplitude of longitudinal vibration, etc. This standard is applicable to the theoretical calculation of longitudinal vibration of ship diesel engine propulsion shafting.
The calculation of longitudinal vibration of shaft systems of gas turbines, electric propulsion and other types can be carried out by reference. It was issued by Ministry of Industry and Information Technology of the People's Republic of China. Issued on 2023-04-21, in force from 2023-11-01.
Found what you need?
Document preview — CB/T 4530-2023
National Standard of the People's Republic of China
- ICS
- 47.020.20
- Classification
- U48
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 2.1 Terms
- 3 Terms and Definitions
- 4 Overview
- 4.1 General requirements
- 5 Technical Requirements
- 6 Calibration conditions
- 6.1 Environmental conditions
- 6.2 Measurement standards and other equipment
- 7 Calibration items and calibration methods
- 7.1 Calibration Items
- 7.2 Calibration method
- 8 Expression of calibration results
- 9 Recalibration interval
1 Foreword
CB/T 4530-2023 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 21 April 2023 and has been in force since 1 November 2023.
The CB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard specifies the calculation method for longitudinal vibration of ship diesel engine direct drive and gear drive propulsion shafting, mainly including the basic principles of longitudinal vibration, conversion of longitudinal vibration equivalent system, calculation of natural vibration frequency and mode shape of longitudinal vibration, and excitation force of longitudinal vibration. Calculation, damping of longitudinal vibration, forced response of longitudinal vibration, allowable amplitude of longitudinal vibration, etc. This standard is applicable to the theoretical calculation of longitudinal vibration of ship diesel engine propulsion shafting. The calculation of longitudinal vibration of shaft systems of gas turbines, electric propulsion and other types can be carried out by reference.
CB/T 4530-2023 falls under ICS 47.020.20, in the field of shipbuilding and marine structures.
This catalogue holds 52 other CB/T standards in that field.
In this catalogue, CB/T standards carry edition years from 1991 to 2025.
3 About this standard
Sector: Shipping Industry Standard (Recommended)
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages (approximate)
4 Related standards
Standards on related subjects:
GB/T 37452-2019 — Wire rope selection methods for offshore cranes
CB/T 4197-2011 — The technical specifications of turbochargers used for marine diesel engines
GB/T 11865-2008 — Marine centrifugal fans
CB/T 4529-2023 — Calculation method of whirling vibration of ship propulsion shafting
CB/T 3892-2019 — Chinese standard
CB/T 4458-2016 — Airborne volatile organic compounds online gas chromatograph
5 Classification and status
International classification (ICS): 47.020.20
Chinese Standard Classification (CCS): U 48
Prefix CB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
How to Download CB/T 4530-2023
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
CB/T 4530-2023
$420.00