Valid

BB/T 0058-2011Wrapping multilayer co-extrusion overloaded membrane bags (English PDF)

包装用多层共挤重载膜、袋

Preview PDF

This is a limited preview

Buy now to download the full PDF (9 pages)

Need quotation for your management?

Get a formal quotation for BB/T 0058-2011 in 30 minutes.

Issued by

Ministry of Industry and Information Technology of the People's Republic of China

Level / Type

National · Recommended

Issue date

June 15, 2011

Implementation date

October 1, 2011

Scope

BB/T 0058-2011 is the English-translated version of 包装用多层共挤重载膜、袋.

BB/T 0058-2011 — This standard specifies the coextruded multilayer packaging film overloaded, bags (hereinafter referred to reload film, bags) terms and definitions, classification, requirements, test methods, inspection rules and signs, packaging, transport and storage.

This standard applies to polyethylene (PE), polypropylene (PP) resin as the main raw material, etc., through the multi-layer coextrusion blow molding process to produce multi-layer co-extruded blown film overloaded with high strength (including FFS film), bags.

Found what you need?

Document preview — BB/T 0058-2011

National Standard of the People's Republic of China

ICS
55.040
Classification
A 82

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative References
  • 2.1 Terms
  • 3 Terms and Definitions
  • 4 Overview
  • 4.1 General requirements
  • 5 Technical Requirements
  • 6 Calibration conditions
  • 6.1 Environmental conditions
  • 6.2 Measurement standards and other equipment
  • 7 Calibration items and calibration methods
  • 7.1 Calibration Items
  • 7.2 Calibration method
  • 8 Expression of calibration results
  • 9 Recalibration interval

1 Foreword

BB/T 0058-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 15 June 2011 and has been in force since 1 October 2011.

The BB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 9 pages in English translation.

2 Scope Preview

This standard specifies the coextruded multilayer packaging film overloaded, bags (hereinafter referred to reload film, bags) terms and definitions, classification, requirements, test methods, inspection rules and signs, packaging, transport and storage. This standard applies to polyethylene (PE), polypropylene (PP) resin as the main raw material, etc., through the multi-layer coextrusion blow molding process to produce multi-layer co-extruded blown film overloaded with high strength (including FFS film), bags. Single-layer film extrusion blow overloaded, bags can also refer to this standard.

BB/T 0058-2011 falls under ICS 55.040, in the field of packaging and distribution of goods.

This catalogue holds 76 other BB/T standards in that field.

In this catalogue, BB/T standards carry edition years from 1994 to 2025.

3 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 9 pages

Chinese original: about 13,157 characters

4 Related standards

Standards on related subjects:

GB/T 325.6-2021 — Packaging container—Steel drum—Part 6: Tapered-opening steel drum

GB/T 325.1-2018 — Packaging containers—Steel drums—Part 1: General specifications

HJ 209-2017 — Technical requirement for environmental labeling products Plastic packaging products

BB/T 0060-2025 — Packaging containers - Polyethyleneterephthalate (PET) preform

BB/T 0053-2023 — In-mold label

BB/T 0048-2017 — Composite anti-counterfeiting closures

5 Classification and status

International classification (ICS): 55.040

Chinese Standard Classification (CCS): A 82

Prefix BB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 9 pages — is available in the English PDF.

How to Download BB/T 0058-2011

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
9 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

BB/T 0058-2011

$85.00